参数资料
型号: MA28140
厂商: Dynex Semiconductor Ltd.
英文描述: Packet Telecommand Decoder
中文描述: 包遥控解码器
文件页数: 32/72页
文件大小: 857K
代理商: MA28140
MA28140
32/72
The sample signals FAR1S and FAR2S should be
asserted to fetch the 32 bits of FAR. CPDUS, FAR1S, FAR2S,
AUS1S and AU2S cannot be asserted simultaneously. If
CPDUS, FAR1S, FAR2S, AUS1S and AU2S are not asserted,
activating the TMC signal will generate invalid data on the
TMD output. If the FAR status report interface is not used, the
FAR1S and FAR2S signals should be connected to V
DD
.
Figure 14 describes the FAR telemetry serial interface.
Serial AU Status Interface in 5 Samples Mode
The 80 bit Authentication Unit Status report can be
retrieved through this interface. It is possible for an application
to use either a serial or a parallel interface to read out this
status report. The serial or parallel mode is selected with the
PAR configuration pin of the PTD (ee section 5.4). The serial
interface in 5 samples mode is implemented with 4 signal lines:
AU1S: first status sample input,
AU2S: second status sample input,
TMC: status clock input, is also used for CPDUS and
FAR.
TMD: status data output, is also used for CPDUS and
FAR.
When AU1S is asserted, the pointer for reading out data
with AU2S is reset to the second octet of the report. The
sample signals AU1S and AU2S should be asserted as
described in Figure 15 to fetch the 80 bits of AUS report.
CPDUS, FAR1S, FAR2S, AUS1S and AU2S cannot be
asserted simultaneously. If CPDUS, FAR1S, FAR2S, AUS1S
and AU2S are not asserted, activating the TMC signal will
generate invalid data on the TMD output. If the AU status
report interface is not used, the AU1S and AU2S signals
should be connected to V
DD
.
Figure 15 describes the AUS telemetry serial interface.
Serial CPDU, FAR, AU Status Interface in 2
Samples Mode
The 16 bit Command Pulse Distribution Unit status report,
the 32 bit Frame Analysis report and the 80 bit Authentication
Unit status report can be retrieved through this interface. The
serial interface in 2 samples mode is implemented with 4
signal lines:
CPDUS: first status sample input,
FAR1S: second status sample input,
TMC: status clock input,
TMD: status data output.
Note: The 0 bit is the MSB and is transmitted first.
Figure 14: FAR Telemetry Serial Interface
FAR1S
FAR2S
TMC
TMD
PTD
APPLICATION
Telemetry
System
PAR = 0
FAR Status Report Serial Interface
F
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
相关PDF资料
PDF描述
MA28151 Radiation hard Programmable Communication Interface
MA28155 Radiation Hard Programmable Peripheral Interface
MA31750 High Performance MIL-STD-1750 Microprocessor
MA31751 Memory Management & Block Protection Unit
MA31753 DMA Controller (DMAC) For An MA31750 System
相关代理商/技术参数
参数描述
MA28150FBB 功能描述:专用陶瓷电容器 HF CHIP RoHS:否 制造商:Panasonic Electronic Components 电容:470 pF 容差:10 % 电压额定值:250 VAC 工作温度范围:- 25 C to + 125 C 端接类型:SMD/SMT 外壳代码 - in: 外壳代码 - mm:
MA28150FBN 功能描述:专用陶瓷电容器 HF CHIP RoHS:否 制造商:Panasonic Electronic Components 电容:470 pF 容差:10 % 电压额定值:250 VAC 工作温度范围:- 25 C to + 125 C 端接类型:SMD/SMT 外壳代码 - in: 外壳代码 - mm:
MA28150GBB 功能描述:专用陶瓷电容器 HF CHIP RoHS:否 制造商:Panasonic Electronic Components 电容:470 pF 容差:10 % 电压额定值:250 VAC 工作温度范围:- 25 C to + 125 C 端接类型:SMD/SMT 外壳代码 - in: 外壳代码 - mm:
MA28150GBN 功能描述:专用陶瓷电容器 HF CHIP RoHS:否 制造商:Panasonic Electronic Components 电容:470 pF 容差:10 % 电压额定值:250 VAC 工作温度范围:- 25 C to + 125 C 端接类型:SMD/SMT 外壳代码 - in: 外壳代码 - mm:
MA28150JAB 功能描述:专用陶瓷电容器 HF CHIP RoHS:否 制造商:Panasonic Electronic Components 电容:470 pF 容差:10 % 电压额定值:250 VAC 工作温度范围:- 25 C to + 125 C 端接类型:SMD/SMT 外壳代码 - in: 外壳代码 - mm: