参数资料
型号: MC68HC11F1VPU2
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: Technical Summary 8-Bit Microcontroller
中文描述: 8-BIT, EEPROM, 2 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 14 MM, 1.40 MM HEIGHT, PLASTIC, LQFP-80
文件页数: 97/163页
文件大小: 711K
代理商: MC68HC11F1VPU2
MC68HC11F1
OPERATING MODES AND ON-CHIP MEMORY
MOTOROLA
TECHNICAL DATA
4-1
SECTION 4OPERATING MODES AND ON-CHIP MEMORY
This section contains information about the modes that define MC68HC11F1 operat-
ing conditions, and about the on-chip memory that allows the MCU to be configured
for various applications.
4.1 Operating Modes
The values of the mode select inputs MODB and MODA during reset determine the
operating mode. Single chip and expanded modes are the normal modes. In single-
chip mode only on-board resources are available. Expanded mode, however, allows
access to external memory or peripheral devices. Each of these two normal modes is
paired with a special mode. Bootstrap mode, a variation of the single-chip mode, exe-
cutes a bootloader program from an internal bootstrap ROM. Test mode allows privi-
leged access to internal resources.
4.1.1 Single-Chip Operating Mode
In single-chip operating mode, the MC68HC11F1 has no external address or data bus.
Ports B, C, and F are available for general-purpose I/O.
4.1.2 Expanded Operating Mode
In expanded operating mode, the MCU can access a 64-Kbyte physical address
space. The address space includes the same on-chip memory addresses used for sin-
gle-chip mode, in addition to external memory and peripheral devices.
The expansion bus is made up of ports B, C, F and the R/W signal. In expanded mode,
high order address bits are output on the port B pins, low order address bits on the port
F pins, and the data bus on port C. The R/W pin indicates the direction of data transfer
on the port C bus.
4.1.3 Special Test Mode
Special test mode, a variation of the expanded mode, is primarily used during Motor-
ola's internal production testing; however, it is accessible for programming the CON-
FIG register, programming calibration data into EEPROM, and supporting emulation
and debugging during development.
4.1.4 Special Bootstrap Mode
Bootstrap mode is a special variation of the single-chip mode. Bootstrap mode allows
special-purpose programs to be entered into internal RAM. When boot mode is select-
ed at reset, a small bootstrap ROM becomes present in the memory map. Reset and
interrupt vectors are located in bootstrap ROM at $BFC0–$BFFF. The MCU fetches
the reset vector, then executes the bootloader.
相关PDF资料
PDF描述
MC68HC11F1VPU3 Technical Summary 8-Bit Microcontroller
MC68HC11F1VPU4 Technical Summary 8-Bit Microcontroller
MI-QC211-MWY Military DC-DC Power Supplies
MI-QC211-MXY Military DC-DC Power Supplies
MI-QC211-MYY Military DC-DC Power Supplies
相关代理商/技术参数
参数描述
MC68HC11F1VPU3 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Technical Summary 8-Bit Microcontroller
MC68HC11F1VPU4 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Technical Summary 8-Bit Microcontroller
MC68HC11FC0 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Technical Summary 8-Bit Microcontroller
MC68HC11FC0CFU4 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Technical Summary 8-Bit Microcontroller
MC68HC11FC0CFU5 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Technical Summary 8-Bit Microcontroller