- 您现在的位置：买卖IC网 > PDF目录98023 > ML60851DTB (LAPIS SEMICONDUCTOR CO LTD) UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 PDF资料下载
参数资料
| 型号： | ML60851DTB |
| 厂商： | LAPIS SEMICONDUCTOR CO LTD |
| 元件分类： | 总线控制器 |
| 英文描述： | UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 |
| 封装： | 10 X 10 MM, 0.80 MM PITCH, PLASTIC, TQFP-44 |
| 文件页数： | 8/84页 |
| 文件大小： | 394K |
| 代理商： | ML60851DTB |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页
FEDL60851D-01
1Semiconductor
ML60851D
15/83
End Point Packet Ready Register (PKTRDY)
This register indicates whether or not the preparations for reading out or writing in a packet data have been
completed. In addition, this register is also used for controlling the handshake packet (ACK/NAK)
Read address
C8h
Write address
48h
D7
D6
D5
D4
D3
D2
D1
D0
After a hardware reset
000
0000
0
After a bus reset
000
0000
0
Definition
0
This register in conjunction with INTENBL register is used for controlling the read/write operation of
ML60851D’s transmit and receive FIFOs. The interrupt generation and disassertion of ML60851D is closely
related to the bits in PKTRDY register and the corresponding fields in INTENBL register.
During normal operation, when ML60851D is receiving data from the host, the data packet received succussfully
without any errors will be stored in the corresponding Rx FIFO of ML60851D, at which point ML60851D will
automatically assert its Receive Packet Ready bit and generate an interrupt cause. At this time if interrupt for the
particular endpoint has been enabled in the INTENBL register, the corresponding interrupt status bit in register
INTSTAT will be asserted and an interrupt will be generated.
In a transmit operation, when ML60851D is sending data to the host, an ACK packet received from the host in
response to succussful transmission of a packet will cause ML60851D to automatically deassert (set to “0”) the
corresponding endpoint’s transmit packet ready bit and hence, generate an interrupt cause. To transmit subsequent
packets from this same end point, the local MCU sets the corresponding transmit packet ready bit after completion
of interrupt servicing (such as writing data in the corresponding transmit FIFO, etc.).
Bit D3 is fixed at “0”, and even if a “1” is written in this bit, that write operation will be invalid.
The operations of the different bits of PKTRDY are described in detail below.
Please note the R/Reset and R/Set notation used above. R/Reset means: the bit field can be read by the local
MCU/and it is Reset (to ‘0’) when a “1” is written to it. The R/Set means: the bit field can be read by the local
MCU/and it is Set (to ‘1’) when a 1 is written to it.
EP0 Receive packet ready (R/Reset)
EP1 Receive packet ready (R/Reset)
EP2 Receive packet ready (R/Reset)
EP0 Transmit packet ready (R/Set)
EP1 Transmit packet ready (R/Set)
EP2 Transmit packet ready (R/Set)
EP3 Transmit packet ready (R/Set)
相关PDF资料 |
PDF描述 |
|---|---|
| ML60852A | UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 |
| ML63187-XXXGA | 4-BIT, MROM, 2 MHz, MICROCONTROLLER, PQFP128 |
| ML63193-XXXWA | 4-BIT, MROM, 2 MHz, MICROCONTROLLER, UUC128 |
| ML64168-XXX | 4-BIT, MROM, 0.7 MHz, MICROCONTROLLER, UUC80 |
| ML64P168-NGP | 4-BIT, OTPROM, 0.7 MHz, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ML60851E | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60851EGA | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60851ETB | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60852 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60852A | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
发布紧急采购，3分钟左右您将得到回复。