![](http://datasheet.mmic.net.cn/120000/MM908E630CVFC_datasheet_3559883/MM908E630CVFC_7.png)
Analog Integrated Circuit Device Data
Freescale Semiconductor
7
908E630
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ESD Voltage
AECQ100
Human Body Model - JESD22/A114 (CZAP = 100 pF, RZAP = 1500 Ω)
LIN pin
All other pIns
Charge Device Model - JESD22/C101 (CZAP = 4.0pF)
Corner pins (1,11,12,22,23,33,34, and 44)
All other pins
According to LIN Conformance Test Specification/LIN EMC Test Specification,
August 2004 (CZAP = 150 pF, RZAP = 330 Ω)
Contact Discharge, Unpowered
LIN pin with 220 pF
LIN pin without capacitor
VS1/VS2 (100 nF to GND
Lx inputs (33 k
Ω serial resistor)
According to IEC 61000-4-2 (CZAP = 150 pF, RZAP = 330 Ω)
Unpowered
LIN pin with 220 pF and without capacitor
VS1/VS2 (100 nF to GND)
Lx inputs (33 k
Ω serial resistor)
VESD1-1
VESD1-2
VESD2-1
VESD2-2
VESD3-1
VESD3-2
VESD3-3
VESD3-4
VESD4-1
VESD4-2
VESD4-3
±10 k
±2000
±750
±500
±20 k
±11 k
>±12 k
±6000
±8000
V
THERMAL RATINGS
Operating Ambient Temperatur
e(8)TA
-40 to 105
°C
Operating Junction Temperature
(9)TJ
-40 to 125
°C
Storage Temperature
TSTG
-40 to 150
°C
Peak Package Reflow Temperature During Solder Mounting
(10),
(11)TSOLDER
°C
Notes
8.
The limiting factor is junction temperature; taking into account the power dissipation, thermal resistance, and heat sinking.
9.
The temperature of analog and MCU die is strongly linked via the package, but can differ in dynamic load conditions, usually because
of higher power dissipation on the analog die. The analog die temperature must not exceed 150°C under these conditions.
10.
Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may
cause malfunction or permanent damage to the device.
11.
Freescale’s Package Reflow capability meets Pb-free requirements for JEDEC standard J-STD-020C. For Peak Package Reflow
Temperature and Moisture Sensitivity Levels (MSL), Go to www.freescale.com, search by part number [e.g. remove prefixes/suffixes
and enter the core ID to view all orderable parts. (i.e. MC33xxxD enter 33xxx), and review parametrics.
Table 2. Maximum Ratings (continued)
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit