- 您现在的位置：买卖IC网 > PDF目录45376 > MPM22CGA800A (INTEL CORP) 32-BIT, 800 MHz, MICROPROCESSOR, XMA PDF资料下载
参数资料
| 型号： | MPM22CGA800A |
| 厂商： | INTEL CORP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 32-BIT, 800 MHz, MICROPROCESSOR, XMA |
| 封装： | MMC-2 |
| 文件页数： | 37/68页 |
| 文件大小： | 966K |
| 代理商： | MPM22CGA800A |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页当前第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页
Pentium
III Processor Mobile Module MMC-2
Featuring Intel
SpeedStep Technology
36
Datasheet
243356-006
5.3.2
Voltage Regulator Control
The VR_ON pin on the connector allows a 3.3-V signal to control the voltage regulator. The
system manufacturer can use this signal to turn the voltage regulator ON or OFF. VR_ON should
be controlled as a function of the same signal (SUSB#) used to control the system’s switched 5.0-V
and 3.3-V power planes. The PIIX4E/M defines Suspend B as the Power Management state in
which power is physically removed from the processor and the voltage regulator. In this state, the
SUSB# pin on the PIIX4E/M controls these power planes. The mobile module provides the
VR_PWRGD signal, which indicates that the voltage regulator power is operating at a stable
voltage level. The system manufacturer should use this signal on the system electronics to control
power inputs and to gate PWROK to the PIIX4E/M South Bridge. Table 26 provides the detailed
definitions and sequences of the voltage signals.
The following list includes additional specifications and clarifications of the power sequence
timing and Figure 7 provides an illustration.
1. The VR_ON signal may only be asserted to a logical high by a digital signal after V_DC
≥
7.5V, V_5
≥ 4.5V, and V_3 ≥ 3.0V.
2. The Rise Time and Fall Time of VR_ON must be less than or equal to 1.0
S.
Table 26. Voltage Signal Definitions and Sequences
Signal
Source
Definitions and Sequences
V_DC
System Electronics
V_DC is required to be between 7.5V and 21.0V DC, and it is driven by
the system electronics’ power supply. V_DC powers the mobile
module DC-to-DC converter for the processor core and I/O voltages.
The mobile module cannot be hot inserted or removed while
V_DC is powered on.
V_5
System Electronics
The system electronics supplies V_5 for the voltage regulator.
V_3
System Electronics
The system electronics supplies V_3 for the 82443BX and powers the
mobile module’s linear regulators for generating the V_CLK and
V_CPUPU voltage rails. V_3 stays on during suspend.
V_3S
System Electronics
The system electronics supplies V_3S and is shut off during suspend.
VR_ON
System Electronics
VR_ON is a 3.3-V signal that enables the voltage regulator circuit.
When driven active high the voltage regulator circuit is activated. The
signal driving VR_ON should be a digital signal with a rise/fall time of
less than or equal to 1.0
S. (V
IL,max= 0.4V, VIH,min = 3.0V.)
V_CORE
Module
A result of VR_ON being asserted, V_CORE is an output of the DC-
DC regulator on the mobile module and is driven to the core voltage of
the processor.
VR_PWRGD
Module
Upon sampling the voltage level of V_CORE (minus tolerances for
ripple), VR_PWRGD is driven active high. If VR_PWRGD is not
sampled active within 1 second of the assertion of VR_ON, then the
system electronics should deassert VR_ON. After V_CORE is
stabilized, VR_PWRGD will assert to logic high (3.3V). This signal
must not be pulled up by the system electronics. VR_PWRGD should
be "logically ANDed" with V_3S to generate the PIIX4E/M input signal,
PWROK. The system electronics should monitor VR_PWRGD to verify
that it is asserted high prior to the active high assertion of PIIX4E/M
PWROK.
V_CPUPU
Module
V_CPUPU is 3.3V. The system electronics uses this voltage to power
the PIIX4E/M-to-processor interface circuitry.
V_CLK
Module
V_CLK is 2.5V. The system electronics uses this voltage to power the
HCLK[0:1] drivers for the processor clock.
相关PDF资料 |
PDF描述 |
|---|---|
| MPM22PDA266B | 32-BIT, 266 MHz, MICROPROCESSOR, XMA |
| MPM22PDA366B | 32-BIT, 366 MHz, MICROPROCESSOR, XMA |
| MPM22PDA266A | 32-BIT, 266 MHz, MICROPROCESSOR, XMA |
| MPM22PDA300A | 32-BIT, 300 MHz, MICROPROCESSOR, XMA |
| MPM22PDA300B | 32-BIT, 300 MHz, MICROPROCESSOR, XMA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MPM-25S | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies |
| MPM-25S-05 | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies |
| MPM-25S-12 | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies |
| MPM-25S-15 | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies |
| MPM-25S-24 | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies |
发布紧急采购，3分钟左右您将得到回复。