参数资料
型号: MPM22CGA800A
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 800 MHz, MICROPROCESSOR, XMA
封装: MMC-2
文件页数: 6/68页
文件大小: 966K
代理商: MPM22CGA800A
Pentium
III Processor Mobile Module MMC-2
Featuring Intel
SpeedStep Technology
8
Datasheet
243356-006
3.1.3
AGP Signals
Table 3 provides descriptions of the AGP interface signals.
Table 3.
AGP Signal Descriptions
Name
Type
Voltage
Description
GAD[31:0]
I/O
AGP
V_3
AGP Address/Data: The standard AGP address and data lines. This
bus functions in the same way as the PCI AD[31:0] bus. The address
is driven with FRAME# assertion, and data is driven or received in
following clocks.
GC/BE[3:0]#
I/O
AGP
V_3
AGP Command/Byte Enable: This bus carries the command
information during AGP cycles when PIPE# is used. During an AGP
write, this bus contains byte enable information. The command is
driven with FRAME# assertion, and byte enables corresponding to
supplied or requested data are driven on the following clocks.
GFRAME#
I/O
AGP
V_3
AGP Frame: This signal is not used during AGP transactions and
remains deasserted by an internal pullup resistor. Assertion indicates
the address phase of a PCI transfer. Negation indicates that the cycle
initiator desires one more data transfer.
GDEVSEL#
I/O
AGP
V_3
AGP Device Select: This signal provides the same function as PCI
DEVSEL#. It is not used during AGP transactions. The 82443BX Host
Bridge system controller drives this signal when a PCI initiator is
attempting to access DRAM. DEVSEL# is asserted at medium
decode time.
GIRDY#
I/O
AGP
V_3
AGP Initiator Ready: Indicates the AGP compliant target is ready to
provide all write data for the current transaction. The signal is
asserted when the initiator is ready for a data transfer.
GTRDY#
I/O
AGP
V_3
AGP Target Ready: This signal indicates the AGP compliant master
is ready to provide all write data for the current transaction. The signal
is asserted when the target is ready for a data transfer.
GSTOP#
I/O
AGP
V_3
AGP Stop: This signal provides the same function as PCI STOP#. It
is not used during AGP transactions. Asserted by the target to
request the master to stop the current transaction.
GREQ#
I
AGP
V_3
AGP Request: AGP master requests for AGP.
GGNT#
O
AGP
V_3
AGP Grant: This signal provides the same function as on PCI.
Additional information is provided on the ST[2:0] bus. PCI Grant:
Permission is given to the master to use PCI.
GPAR
I/O
AGP
V_3
AGP Parity: A single parity bit is provided over GAD[31:0] and GC/
BE[3:0]. This signal is not used during AGP transactions.
PIPE#
I
AGP
V_3
Pipelined Request: This signal is asserted by the current master to
indicate a full width address that is to be queued by the target. The
master queues one request each rising clock edge while PIPE# is
asserted.
SBA[7:0]
I
AGP
V_3
Sideband Address: This bus provides an additional conduit to pass
address and commands to the 82443BX Host Bridge System
Controller from the AGP master.
RBF#
I
AGP
V_3
Read Buffer Full: This signal Indicates if the master is ready to
accept previously requested, low-priority read data.
相关PDF资料
PDF描述
MPM22PDA266B 32-BIT, 266 MHz, MICROPROCESSOR, XMA
MPM22PDA366B 32-BIT, 366 MHz, MICROPROCESSOR, XMA
MPM22PDA266A 32-BIT, 266 MHz, MICROPROCESSOR, XMA
MPM22PDA300A 32-BIT, 300 MHz, MICROPROCESSOR, XMA
MPM22PDA300B 32-BIT, 300 MHz, MICROPROCESSOR, XMA
相关代理商/技术参数
参数描述
MPM-25S 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies
MPM-25S-05 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies
MPM-25S-12 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies
MPM-25S-15 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies
MPM-25S-24 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Universal Input, 25W Miniature, PC Mount AC/DC Power Supplies