- 您现在的位置：买卖IC网 > PDF目录262949 > MT46V32M16P-6T 32M X 16 DDR DRAM, 0.7 ns, PDSO66 PDF资料下载
参数资料
| 型号： | MT46V32M16P-6T |
| 元件分类： | DRAM |
| 英文描述： | 32M X 16 DDR DRAM, 0.7 ns, PDSO66 |
| 封装： | 0.400 INCH, LEAD FREE, PLASTIC, TSOP-66 |
| 文件页数： | 8/82页 |
| 文件大小： | 2855K |
| 代理商： | MT46V32M16P-6T |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页
512Mb: x4, x8, x16
DDR SDRAM
09005aef80a1d9e7
Micron Technology, Inc., reserves the right to change products or specifications without notice.
512MBDDRx4x8x16_2.fm - Rev. H 7/04 EN
16
2000 Micron Technology, Inc. All rights reserved.
Commands
available commands. This is followed by a verbal
description of each command. Two additional Truth
Tables—Table 8 on page 42, and Table 9 on page 44—
appear following “Operations” on page 19 and provide
current state/next state information.
NOTE:
1. CKE is HIGH for all commands shown except SELF REFRESH.
2. BA0–BA1 select either the mode register or the extended mode register (BA0 = 0, BA1 = 0 select the mode register;
BA0 = 1, BA1 = 0 select extended mode register; other combinations of BA0-BA1 are reserved). A0–A12 provide the op-
code to be written to the selected mode register.
3. BA0–BA1 provide bank address and A0–A12 provide row address.
4. BA0–BA1 provide bank address; A0–Ai provide column address, (where i=9 for x16, i=9,11 for x8, and i=9,11,12 for x4)
A10 HIGH enables the auto precharge feature (non persistent), and A10 LOW disables the auto precharge feature.
5. A10 LOW: BA0-BA1 determine which bank is precharged.
A10 HIGH: all banks are precharged and BA0-BA1 are “Don’t Care.”
6. This command is AUTO REFRESH if CKE is HIGH, SELF REFRESH if CKE is LOW.
7. Internal refresh counter controls row addressing; for within the Self Refresh mode all inputs and I/Os are “Don’t Care”
except for CKE.
8. Applies only to read bursts with auto precharge disabled; this command is undefined (and should not be used) for read
bursts with auto precharge enabled and for write bursts.
9. DESELECT and NOP are functionally interchangeable.
NOTE:
1. Used to mask write data; provided coincident with the corresponding data.
Table 5:
Truth Table – Commands
Note 1 applies to all commands.
NAME (FUNCTION)
CS#
RAS#
CAS#
WE#
ADDR
NOTES
DESELECT (NOP)
H
XXX
X
9
NO OPERATION (NOP)
L
HHH
X
9
ACTIVE (Select bank and activate row)
L
H
Bank/Row
3
READ (Select bank and column, and start READ burst)
LH
Bank/Col
4
WRITE (Select bank and column, and start WRITE burst)
L
H
L
Bank/Col
4
BURST TERMINATE
LH
H
L
X
8
PRECHARGE (Deactivate row in bank or banks)
L
H
L
Code
5
AUTO REFRESH or SELF REFRESH
(Enter self refresh mode)
LLL
H
X
6, 7
LOAD MODE REGISTER
LLLL
Op-Code
2
Table 6:
Truth Table – DM Operation
Note 1 applies to all commands
NAME (FUNCTION)
DM
DQ
Write Enable
L
Valid
Write Inhibit
H
X
相关PDF资料 |
PDF描述 |
|---|---|
| MT28F644W18FE-705KTET | 4M X 16 FLASH 1.8V PROM, 70 ns, PBGA56 |
| MPAT-122128-1003MS | 12200 MHz - 12750 MHz RF/MICROWAVE FIXED ATTENUATOR, 2.2 dB INSERTION LOSS-MAX |
| MPAT-122128-10101MS | 12200 MHz - 12750 MHz RF/MICROWAVE FIXED ATTENUATOR, 2.2 dB INSERTION LOSS-MAX |
| MPAT-122128-10103FS | 12200 MHz - 12750 MHz RF/MICROWAVE FIXED ATTENUATOR, 2.2 dB INSERTION LOSS-MAX |
| MPAT-122128-10103MS | 12200 MHz - 12750 MHz RF/MICROWAVE FIXED ATTENUATOR, 2.2 dB INSERTION LOSS-MAX |
相关代理商/技术参数 |
参数描述 |
|---|
发布紧急采购，3分钟左右您将得到回复。