参数资料
型号: PI7C7300DNAE
厂商: Pericom
文件页数: 51/107页
文件大小: 0K
描述: IC PCI-PCI BRIDGE 3PORT 272-BGA
标准包装: 40
系列: *
应用: *
接口: *
电源电压: *
封装/外壳: 272-BBGA
供应商设备封装: 272-PBGA(27x27)
包装: 管件
安装类型: 表面贴装
PI7C7300D
3-PORT PCI-TO-PCI BRIDGE
Page 48 of 107
Pericom Semiconductor
November 2005 - Revision 1.01
32 bits registers can both be set to the same value, while the lower base register is set
greater than the lower limit register. Otherwise, the upper 32-bit base must be greater
than the upper 32-bit limit.
5.4
VGA SUPPORT
PI7C7300D provides two modes for VGA support:
VGA mode, supporting VGA-compatible addressing
VGA snoop mode, supporting VGA palette forwarding
5.4.1
VGA MODE
When a VGA-compatible device exists downstream from PI7C7300D, set the VGA
mode bit in the bridge control register in configuration space to enable VGA mode.
When PI7C7300D is operating in VGA mode, it forwards downstream those transactions
addressing the VGA frame buffer memory and VGA I/O registers, regardless of the
values of the base and limit address registers. PI7C7300D ignores transactions initiated
on the secondary interface addressing these locations.
The VGA frame buffer consists of the following memory address range:
000A 0000h–000B FFFFh
Read transactions to frame buffer memory are treated as non-prefetchable. PI7C7300D
requests only a single data transfer from the target, and read byte enable bits are
forwarded to the target bus.
The VGA I/O addresses are in the range of 3B0h–3BBh and 3C0h–3DFh I/O. These I/O
addresses are aliases every 1KB throughout the first 64KB of I/O space. This means that
address bits <15:10> are not decoded and can be any value, while address bits [31:16]
must be all 0s. VGA BIOS addresses starting at C0000h are not decoded in VGA mode.
5.4.2
VGA SNOOP MODE
PI7C7300D provides VGA snoop mode, allowing for VGA palette write transactions to
be forwarded downstream. This mode is used when a graphics device downstream from
PI7C7300D needs to snoop or respond to VGA palette write transactions. To enable the
mode, set the VGA snoop bit in the command register in configuration space. Note that
PI7C7300D claims VGA palette write transactions by asserting DEVSEL# in VGA
snoop mode.
When VGA snoop bit is set, PI7C7300D forwards downstream transactions within the
3C6h, 3C8h and 3C9h I/O addresses space. Note that these addresses are also forwarded
as part of the VGA compatibility mode previously described. Again, address bits
<15:10> are not decoded, while address bits <31:16> must be equal to 0, which means
that these addresses are aliases every 1KB throughout the first 64KB of I/O space.
相关PDF资料
PDF描述
PI7C8140AMAE IC PCI-PCI BRIDGE 2PORT 128-QFP
PI7C8150ANDE IC PCI-PCI BRIDGE 2PORT 256-PBGA
PI7C8150BNDIE IC PCI-PCI BRIDGE ASYNC 256-PBGA
PI7C8152BMAIE IC PCI-PCI BRIDGE 2PORT 160-MQFP
PI7C8154ANAE IC PCI-PCI BRIDGE ASYNC 304-PBGA
相关代理商/技术参数
参数描述
PI7C7300EVB 功能描述:界面开发工具 3 Port PCI Bridge Eval Brd RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
PI7C8140A 制造商:PERICOM 制造商全称:Pericom Semiconductor Corporation 功能描述:2 PORT PCI TO PCI BRIDGE PLX PCI 6140 COMPARISON
PI7C8140AEVB 功能描述:界面开发工具 2 Port PCI to PCI Bridge Eval Brd RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
PI7C8140AMA 制造商:PERICOM 制造商全称:Pericom Semiconductor Corporation 功能描述:2-Port PCI-to-PCI Bridge
PI7C8140AMAE 功能描述:外围驱动器与原件 - PCI PCI -to -PCI Bridge 2 Port RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray