参数资料
型号: SC16C850IET,157
厂商: NXP Semiconductors
文件页数: 6/55页
文件大小: 0K
描述: IC UART SINGLE W/FIFO 36-TFBGA
标准包装: 2,450
特点: 可编程
通道数: 1,UART
FIFO's: 128 字节
规程: RS485
电源电压: 2.5 V ~ 3.3 V
带自动流量控制功能:
带IrDA 编码器/解码器:
带故障启动位检测功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 36-TFBGA
供应商设备封装: 36-TFBGA(3.5x3.5)
包装: 托盘
其它名称: 935284685157
SC16C850IET
SC16C850IET-ND
SC16C850
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 11 November 2010
14 of 55
NXP Semiconductors
SC16C850
2.5 to 3.3 V UART with 128-byte FIFOs and IrDA encoder/decoder
each time the Receive Holding Register (RHR) is read. The actual time-out value is
4 character time, including data information length, start bit, parity bit, and the size of stop
bit, that is, 1
×, 1.5×, or 2× bit times.
6.9 Programmable baud rate generator
The SC16C850 UART contains a programmable rational baud rate generator that takes
any clock input and divides it by a divisor in the range between 1 and (216
1). The
SC16C850 offers the capability of dividing the input frequency by rational divisor. The
fractional part of the divisor is controlled by the CLKPRES register in the ‘first extra feature
register set’.
(1)
where:
N is the integer part of the divisor in DLL and DLM registers;
M is the fractional part of the divisor in CLKPRES register;
fXTAL1 is the clock frequency at XTAL1 pin.
Prescaler = 1 when MCR[7] is set to 0.
Prescaler = 4 when MCR[7] is set to 1.
A single baud rate generator is provided for the transmitter and receiver. The
programmable Baud Rate Generator is capable of operating with a frequency of up to
80 MHz. To obtain maximum data rate, it is necessary to use full rail swing on the clock
input. The SC16C850 can be configured for internal or external clock operation. For
internal clock operation, an industry standard crystal is connected externally between the
XTAL1 and XTAL2 pins (see Figure 7). Alternatively, an external clock can be connected
to the XTAL1 pin (see Figure 8) to clock the internal baud rate generator for standard or
custom rates (see Table 7).
The generator divides the input 16
× clock by any divisor from 1 to (216 1). The
SC16C850 divides the basic external clock by 16. The baud rate is configured via the
CLKPRES, DLL and DLM internal register functions. Customized baud rates can be
achieved by selecting the proper divisor values for the MSB and LSB sections of the baud
rate generator.
Fig 6.
Prescalers and baud rate generator block diagram
baud rate
f
XTAL1
MCR 7
[]
16
N
M
16
------
+
×
-------------------------------------------------------------------
=
002aac645
OSCILLATOR
XTAL1
XTAL2
DIVIDE-BY-1
DIVIDE-BY-4
CLKPRES
[3:0]
BAUD RATE
GENERATOR
(DLL, DLM)
transmitter and
receiver clock
MCR[7] = 0
MCR[7] = 1
相关PDF资料
PDF描述
SC16IS750IBS,128 IC UART I2C/SPI 24-HVQFN
SC16IS741IPW,128 IC UART 16TSSOP
SC16IS740IPW,128 IC UART SINGLE W/FIFO 16-TSSOP
SC16IS750IBS,157 IC UART 64BYTE 24HVQFN
SC16C550BIBS,157 IC UART SOT617-1
相关代理商/技术参数
参数描述
SC16C850IET-G 功能描述:UART 接口集成电路 16C 2.5-5V 5MBPS UART 128BFIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C850IET-S 功能描述:UART 接口集成电路 16C 2.5-5V 5MBPS UART 128BFIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C850L 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode parallel bus interface
SC16C850LIB,128 制造商:NXP Semiconductors 功能描述:
SC16C850LIB,151 制造商:NXP Semiconductors 功能描述: