参数资料
型号: W25Q64CVSFIG
厂商: Winbond Electronics
文件页数: 15/80页
文件大小: 0K
描述: IC SPI FLASH 64MBIT 16SOIC
标准包装: 44
系列: SpiFlash®
格式 - 存储器: 闪存
存储器类型: FLASH
存储容量: 64M(8M x 8)
速度: 80MHz
接口: SPI 串行
电源电压: 2.7 V ~ 3.6 V
工作温度: -40°C ~ 85°C
封装/外壳: 16-SOIC(0.295",7.50mm 宽)
供应商设备封装: 16-SOIC
包装: 管件
W25Q64CV
7.1.6
Complement Protect Bit (CMP)
The Complement Protect bit (CMP) is a non-volatile read/write bit in the status register (S14). It is used in
conjunction with SEC, TB, BP2, BP1 and BP0 bits to provide more flexibility for the array protection. Once
CMP is set to 1, previous array protection set by SEC, TB, BP2, BP1 and BP0 will be reversed. For
instance, when CMP=0, a top 4KB sector can be protected while the rest of the array is not; when
CMP=1, the top 4KB sector will become unprotected while the rest of the array become read-only. Please
refer to the Status Register Memory Protection table for details. The default setting is CMP=0.
7.1.7
Status Register Protect Bit (SRP1, SRP0)
The Status Register Protect bits (SRP1 and SRP0) are non-volatile read/write bits in the status register
(S8 and S7). The SRP bits control the method of write protection: software protection, hardware
protection, power supply lock-down or one time programmable (OTP) protection.
SRP1
0
0
0
1
1
SRP0
0
1
1
0
1
/WP
X
0
1
X
X
Status
Register
Software
Protection
Hardware
Protected
Hardware
Unprotected
Power Supply
Lock-Down
One Time
Program (2)
Description
/WP pin has no control. The Status register can be written to
after a Write Enable instruction, WEL=1. [Factory Default]
When /WP pin is low the Status Register locked and can not
be written to.
When /WP pin is high the Status register is unlocked and can
be written to after a Write Enable instruction, WEL=1.
Status Register is protected and can not be written to again
until the next power-down, power-up cycle. (1)
Status Register is permanently protected and can not be
written to.
Note:
1. When SRP1, SRP0 = (1, 0), a power-down, power-up cycle will change SRP1, SRP0 to (0, 0) state. 2.
This feature is available upon special order. Please contact Winbond for details.
7.1.8
Erase/Program Suspend Status (SUS)
The Suspend Status bit is a read only bit in the status register (S15) that is set to 1 after executing a
Erase/Program Suspend (75h) instruction. The SUS status bit is cleared to 0 by Erase/Program Resume
(7Ah) instruction as well as a power-down, power-up cycle.
7.1.9
Security Register Lock Bits (LB3, LB2, LB1)
The Security Register Lock Bits (LB3, LB2, LB1) are non-volatile One Time Program (OTP) bits in Status
Register (S13, S12, S11) that provide the write protect control and status to the Security Registers. The
default state of LB[3:1] is 0, Security Registers are unlocked. LB[3:1] can be set to 1 individually using the
Write Status Register instruction. LB[3:1] are One Time Programmable (OTP), once it’s set to 1, the
corresponding 256-Byte Security Register will become read-only permanently.
Publication Release Date: May 07, 2012
- 15 -
Revision F
相关PDF资料
PDF描述
VE-24P-CW-S CONVERTER MOD DC/DC 13.8V 100W
650090-1 AMP .050 CL CEC 56 DUAL POS
ISL9021AIRUCZ-T7A IC REG LDO 1.8V .25A 6UTDFN
1-745493-5 CONN D-SUB RECPT 15P 22-26AWG AU
VE-21L-CX CONVERTER MOD DC/DC 28V 75W
相关代理商/技术参数
参数描述
W25Q64CVSFIP 制造商:WINBOND 制造商全称:Winbond 功能描述:3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q64CVSSAG 制造商:WINBOND 制造商全称:Winbond 功能描述:3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q64CVSSAP 制造商:WINBOND 制造商全称:Winbond 功能描述:3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q64CVSSIG 功能描述:IC SPI FLASH 64MBIT 8-SOIC RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:1,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (512 x 8) 速度:400kHz 接口:I²C,2 线串口 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC(0.173",4.40mm 宽) 供应商设备封装:8-MFP 包装:带卷 (TR)
W25Q64CVSSIP 制造商:WINBOND 制造商全称:Winbond 功能描述:3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI