收藏本站
参数资料
型号： WJLXT971ALE.A4SE000
厂商： CORTINA SYSTEMS INC
元件分类： 网络接口
英文描述： DATACOM, ETHERNET TRANSCEIVER, PQFP64
封装： LEAD FREE, LQFP-64
文件页数： 102/116页
文件大小： 1172K
代理商： WJLXT971ALE.A4SE000
LXT971A 3.3V Dual-Speed Fast Ethernet Transceiver
86
Datasheet
Document #: 249414
Revision #: 002
Rev. Date: August 7, 2002
20.7:4
LED3
Programming
bits
0000 = Display Speed Status
0001 = Display Transmit Status
0010 = Display Receive Status (Default)
0011 = Display Collision Status
0100 = Display Link Status
0101 = Display Duplex Status
0110 = Unused
0111 = Display Receive or Transmit Activity
1000 = Test mode- turn LED on
1001 = Test mode- turn LED off
1010 = Test mode- blink LED fast
1011 = Test mode- blink LED slow
1100 = Display Link and Receive Status combined 2
(Stretched)3
1101 = Display Link and Activity Status combined 2
(Stretched)3
1110 = Display Duplex and Collision Status combined 4
(Stretched)3
1111 = Unused
R/W
0010
20.3:2
LEDFREQ5
00 = Stretch LED events to 30 ms.
01 = Stretch LED events to 60 ms.
10 = Stretch LED events to 100 ms.
11 = Reserved.
R/W
00
20.1
PULSE-
STRETCH
0 = Disable pulse stretching of all LEDs.
1 = Enable pulse stretching of all LEDs.
R/W
1
20.0
Reserved
Ignore.
R/W
N/A
Table 57. Digital Config Register (Address 26)
Bit
Name
Description
Type 1
Default
26.15:12
Reserved
RO
0
26.11
MII Drive Strength
1 = Increased MII drive strength
0 = Normal MII drive strength
R/W
0
26.10
Reserved
RO
0
26.9
Show Symbol Error
1 = Map Symbol Error Signal To RXER
0 = Normal RXER
R/W
0
26.8:0
Reserved
RO
0
1. R/W = Read /Write, RO = Read Only, LH = Latching High
Table 56. LED Configuration Register (Address 20, Hex 14) (Continued)
Bit
Name
Description
Type 1
Default
1. R/W = Read /Write
RO = Read Only
LH = Latching High
2. Link status is the primary LED driver. The LED is asserted (solid ON) when the link is up.
The secondary LED driver (Receive or Activity) causes the LED to change state (blink).
3. Combined event LED settings are not affected by Pulse Stretch Register bit 20.1. These display settings
are stretched regardless of the value of 20.1.
4. Duplex status is the primary LED driver. The LED is asserted (solid ON) when the link is full-duplex.
Collision status is the secondary LED driver. The LED changes state (blinks) when a collision occurs.
5. Values are relative approximations. Not guaranteed or production tested.
相关PDF资料
PDF描述
WJLXT971ALE.A4SE001 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALC.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALE.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALC.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALE.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
相关代理商/技术参数
参数描述
WJLXT971CA4 制造商:Intel 功能描述:
WJLXT972ALC.A4 功能描述:IC TRANS 3.3V ETHERNET 64-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:25 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:4.5 V ~ 5.5 V 安装类型:通孔 封装/外壳:16-DIP（0.300"，7.62mm） 供应商设备封装:16-PDIP 包装:管件
WJLXT972ALC.A4 S E001 制造商:Intel 功能描述:PHY 1-CH 10Mbps/100Mbps 64-Pin LQFP T/R
WJLXT972ALC.A4-857341 功能描述:TXRX ETH 10/100 SGL PORT 64-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 产品目录页面:1402 (CN2011-ZH PDF)
WJLXT972ALC.A4-857345 功能描述:TXRX ETH 10/100 SGL PORT 64-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:1 系列:- 类型:线路收发器 驱动器/接收器数:5/3 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC 包装:Digi-Reel® 产品目录页面:918 (CN2011-ZH PDF) 其它名称:296-25096-6
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*