- 您现在的位置：买卖IC网 > PDF目录278507 > ZPSD813F3V-20J 1M X 1 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQCC52 PDF资料下载
参数资料
| 型号： | ZPSD813F3V-20J |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 1M X 1 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQCC52 |
| 封装： | PLASTIC, LDCC-52 |
| 文件页数： | 59/132页 |
| 文件大小： | 513K |
| 代理商： | ZPSD813F3V-20J |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页当前第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页
PSD813F Family
Preliminary
28
The
PSD813F
Functional
Blocks
(cont.)
9.1.1.8.3 Flash Erase Suspend Instruction
When a Flash Sector Erase operation is in progress, the Erase Suspend instruction will
suspend the operation by writing 0B0h to any address when an appropriate Chip Select
(FSi or CSBOOTi) is true. (See Table 9). This allows reading of data from another Flash
sector after the Erase operation has been suspended. Erase suspend is accepted only
during the Flash Sector Erase instruction execution and defaults to read array mode. An
Erase Suspend instruction executed during an Erase timeout will, in addition to suspending
the erase, terminate the time out.
The Toggle Bit DQ6 stops toggling when the PSD813F internal logic is suspended. The
toggle Bit status must be monitored at an address within the Flash sector being erased. The
Toggle Bit will stop toggling between 0.1 s and 15 s after the Erase Suspend instruction
has been executed. The PSD813F will then automatically be set to Read Flash Block
Memory Array mode.
If an Erase Suspend instruction was executed, the following rules apply:
Attempting to read from a Flash sector that was being erased will output invalid data.
Reading from a Flash sector that was not being erased is valid.
The Flash memory cannot be programmed, and will only respond to Erase Resume
and Reset instructions (read is an operation and is OK).
If a Reset instruction is received, data in the Flash sector that was being erased will
be invalid.
9.1.1.8.4 Flash Erase Resume Instruction
If an Erase Suspend instruction was previously executed, the erase operation may be
resumed by this instruction. The Erase Resume instruction consists of writing 030h to any
address while an appropriate Chip Select (FSi or CSBOOTi) is true. (See Table 9.)
9.1.1.9 Flash and EEPROM Memory Specific Features
9.1.1.9.1 Flash and EEPROM Sector Protect
Each Flash and EEPROM sector can be separately protected against Program and Erase
functions. Sector Protection provides additional data security because it disables all
program or erase operations. This mode can be activated through the JTAG Port or a
Device Programmer.
Sector protection can be selected for each sector using the PSDsoft Configuration program.
This will automatically protect selected sectors when the device is programmed through
the JTAG Port or a Device Programmer. Flash and EEPROM sectors can be
unprotected to allow updating of their contents using the JTAG Port or a Device
Programmer. The microcontroller can read (but cannot change) the sector protection bits.
Any attempt to program or erase a protected Flash or EEPROM sector will be ignored by
the device. The Verify operation will result in a read of the protected data. This allows a
guarantee of the retention of the Protection status.
The sector protection status can be read by the MCU through the Flash protection and
PSD/EE protection registers (CSIOP). See Table 11.
相关PDF资料 |
PDF描述 |
|---|---|
| ZDVG10A | 7 SEG NUMERIC DISPLAY, GREEN, 10.16 mm |
| ZMG75W | SINGLE COLOR LED, GREEN, 2.3 mm |
| ZMGUY62M-01 | DUAL COLOR LED |
| Z505 | INTERCONNECTION DEVICE |
| Z410 | INTERCONNECTION DEVICE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ZPSD813F3V-A-15J | 制造商:WSI 功能描述: |
| ZPSD813F4-12JI | 制造商:WSI 功能描述: |
| ZPSD813F4-15J | 制造商:WSI 功能描述: 制造商:STMicroelectronics 功能描述:microcontroller peripheral devices 制造商:STMicroelectronics 功能描述:Flash in-system programmable microcontroller peripheral device |
| ZPSD813F4-90J | 制造商:WSI 功能描述: |
| ZPSD813F5-15J | 制造商:WSI 功能描述: |
发布紧急采购，3分钟左右您将得到回复。