参数资料
型号: 78Q8430-100IGT/F
厂商: Maxim Integrated Products
文件页数: 28/88页
文件大小: 0K
描述: IC LAN MEDIA ACCESS CTLR 100LQFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 90
控制器类型: 以太网控制器,MAC/PHY
电源电压: 3.3V
电流 - 电源: 230mA
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 托盘
78Q8430 Data Sheet
DS_8430_001
34
Rev. 1.2
6.7.1
Address Filtering
The 78Q8430 CAM is loaded upon reset with a set of default rules for users who only want to use the
address filter feature (see Section 6.7.4). The following rules are intended as a template to provide
address-filtering functionality. They support four multicast and eight unicast address filters. The last
unicast address filter rule is configured by default as a promiscuous mode rule such that the address-filter
is in promiscuous mode right out of reset.
6.7.1.1
Promiscuous Mode Off
In promiscuous mode, all addresses are passed on to the host driver. This means that, as long as
promiscuous mode is enabled, none of the other address filters are effective. Promiscuous mode must
therefore be disabled before any address filtering can happen. The following procedure should be used
to deactivate promiscuous mode:
STEP 1. Change the Match Control field of rule 0x30 from MD to DROP. This will cause any frame with
an address that does not match any other address filter to be dropped.
6.7.1.2
Promiscuous Mode On
The promiscuous mode filter is a filter with all address bits masked as wildcard bits such that any address
will match. Turning promiscuous mode on and off is the same as changing the promiscuous mode filter
from a positive filter to a negative filter (see Section 6.7.1.5). The following procedure should be used to
activate promiscuous mode:
STEP 1. Change the Match Control field of rule 0x30 from DROP to MD. This will cause all frames to
pass the address filters.
6.7.1.3
Unicast Address Filters
The default CAM rule set supports eight unicast address filters. The first, unicast filter #0, is the
promiscuous mode filter and is reserved for that purpose. The remaining seven are general use. Each
filter has two components, the 48-bit address that it matches and a mask that defines which bits of the
address are relevant and which bits are wildcards. Each byte of each address filter has a rule assigned
to it. The following table summarizes the association of unicast filter bytes and CAM rules.
Table 24: CAM Rules Associated with Unicast Filter Bytes
Byte [0]
Byte [1]
Byte [2]
Byte [3]
Byte [4]
Byte [5]
U/C Filter #7
0x77
0x6F
0x5F
0x57
0x47
0x37
U/C Filter #6
0x76
0x6E
0x5E
0x56
0x46
0x36
U/C Filter #5
0x75
0x6D
0x5D
0x55
0x45
0x35
U/C Filter #4
0x74
0x6C
0x5C
0x54
0x44
0x34
U/C Filter #3
0x73
0x6B
0x5B
0x53
0x43
0x33
U/C Filter #2
0x72
0x6A
0x5A
0x52
0x42
0x32
U/C Filter #1
0x71
0x69
0x59
0x51
0x41
0x31
Note: Bytes are in network transmit order starting with Byte [0].
相关PDF资料
PDF描述
A1020B-1CQ84C IC FPGA 2K GATES 84-CQFP COM
A1225A-1PQ100C IC FPGA 2500 GATES 100-PQFP COM
A1440A-1VQG100I IC FPGA 4K GATES 100-VQFP
A3P1000-1FGG484T IC FPGA 1KB FLASH 1M 484-FBGA
A3PE1500-PQG208 IC FPGA 444I/O 208PQFP
相关代理商/技术参数
参数描述
78Q8430-100IGTR/F 功能描述:以太网 IC 10/100 Ethernet MAC & PHY RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
78Q8430-128CGT/F 制造商:Maxim Integrated Products 功能描述:Ethernet ICs 10/100 Ethernet MAC & PHY
78Q8430-128CGTR/F 制造商:Maxim Integrated Products 功能描述:Ethernet ICs 10/100 Ethernet MAC & PHY
78Q8430-ARM9-EVM 功能描述:EVALUATION MODULE 78Q8430 ARM9 RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:* 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理,电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板
78Q8430EBST#DB 功能描述:以太网开发工具 3-in-1 Silicon Delay Line RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压: