收藏本站
参数资料
型号： ADUC832BCPZ
厂商： Analog Devices Inc
文件页数： 75/92页
文件大小： 0K
描述： IC MCU 62K FLASH ADC/DAC 56LFCSP
标准包装： 1
系列： MicroConverter® ADuC8xx
核心处理器： 8052
芯体尺寸： 8-位
速度： 16MHz
连通性： EBI/EMI，I²C，SPI，UART/USART
外围设备： PSM，温度传感器，WDT
输入/输出数： 34
程序存储器容量： 62KB（62K x 8）
程序存储器类型： 闪存
EEPROM 大小： 4K x 8
RAM 容量： 2.25K x 8
电压 - 电源 (Vcc/Vdd)： 2.7 V ~ 5.5 V
数据转换器： A/D 8x12b，D/A 2x12b
振荡器型： 内部
工作温度： -40°C ~ 85°C
封装/外壳： 56-VFQFN 裸露焊盘，CSP
包装： 托盘
Data Sheet
ADuC832
Rev. B | Page 77 of 92
UART SERIAL PORT BAUD RATE GENERATION
Mode 0 Baud Rate Generation
The baud rate in Mode 0 is fixed.
Mode 0 Baud Rate = (Core_CLK Frequency/12)
Mode 2 Baud Rate Generation
The baud rate in Mode 2 depends on the value of the SMOD bit
in the PCON SFR. If SMOD = 0, the baud rate is 1/64 of the
core clock. If SMOD = 1, the baud rate is 1/32 of the core clock:
Mode 2 Baud Rate = (2SMOD/64) × (Core_CLK Frequency)
Mode 1 and Mode 3 Baud Rate Generation
The baud rates in Mode 1 and Mode 3 are determined by the
overflow rate in Timer 1 or Timer 2, or both (one for transmit
and the other for receive).
TIMER 1 GENERATED BAUD RATES
When Timer 1 is used as the baud rate generator, the baud rates
in Mode 1 and Mode 3 are determined by the Timer 1 overflow
rate and the value of SMOD as follows:
Mode 1 and Mode 3 Baud Rate =
(2SMOD/32) × (Timer 1 Overflow Rate)
The Timer 1 interrupt should be disabled in this application.
The timer itself can be configured for either timer or counter
operation, and in any of its three running modes. In the most
typical application, it is configured for timer operation in the
autoreload mode (high nibble of TMOD = 0010 binary). In that
case, the baud rate is given by the formula:
Modes 1 and 3 Baud Rate =
(2SMOD/32) × (Core_CLK/(12 × [256 TH1]))
Table 41 shows some commonly used baud rates and how they
can be calculated from a core clock frequency of 16.78 MHz
and 2.0971 MHz. A 5% error is tolerable using asynchronous
(start/stop) communications.
Table 41. Commonly Used Baud Rates, Timer 1
Ideal
Baud
Core_CLK
(MHz)
SMOD
Value
TH1 Reload
Value
Actual
Baud
%
Error
9600
16.78
1
9 (F9H)
9709
1.14
2400
16.78
1
36 (DCH)
2427
1.14
1200
16.78
1
73 (B7H)
1197
0.25
1200
2.10
0
9 (F4H)
1213
1.14
TIMER 2 GENERATED BAUD RATES
Baud rates can also be generated using Timer 2. Using Timer 2
is similar to using Timer 1 in that the timer must overflow 16
times before a bit is transmitted/received. Because Timer 2 has a
16-bit autoreload mode, a wider range of baud rates is possible
using Timer 2.
Mode 1 and Mode 3 Baud Rate =
(1/16) × (Timer 2 Overflow Rate)
Therefore, when Timer 2 is used to generate baud rates, the timer
increments every two clock cycles and not every core machine
cycle. Thus, it increments six times faster than Timer 1, and
therefore baud rates six times faster are possible. Because Timer
2 has 16-bit autoreload capability, very low baud rates are still
possible.
Timer 2 is selected as the baud rate generator by setting the
TCLK and/or RCLK bit in T2CON. The baud rates for transmit
and receive can be simultaneously different. Setting RCLK and/or
TCLK puts Timer 2 into its baud rate generator mode, as shown
in Figure 83.
In this case, the baud rate is given by the following formula:
Modes 1 and 3 Baud Rate =
(Core_CLK)/(32 × [6556 (RCAP2H, RCAP2L)])
Table 42 shows some commonly used baud rates and how they
can be calculated from a core clock frequency of 16.78 MHz
and 2.10 MHz.
Table 42. Commonly Used Baud Rates, Timer 2
Ideal
Baud
Core_CLK
(MHz)
RCAP2H
Value
RCAP2L
Value
Actual
Baud
%
Error
19,200
16.78
1 (FFH)
27 (E5H)
19418
1.14
9600
16.78
1 (FFH)
55 (C9H)
9532
0.7
2400
16.78
1 (FFH)
218 (26H)
2405
0.21
1200
16.78
2 (FEH)
181 (4BH)
1199
0.02
9600
2.10
1 (FFH)
7 (FBH)
9362
2.4
2400
2.10
1 (FFH)
27 (ECH)
2427
1.14
1200
2.10
1 (FFH)
55 (C9H)
1191
0.7
相关PDF资料
PDF描述
31-10 BNC FRONT MOUNT RECEPT
D38999/20JD97SN CONN RCPT 12POS WALL MNT W/SCKT
ADUC848BSZ62-5 IC FLASH MCU W/16BIT ADC 52MQFP
ADUC847BSZ32-5 IC FLASH MCU W/24BIT ADC 52-MQFP
D38999/20WD97SB CONN RCPT 12POS WALL MNT W/SCKT
相关代理商/技术参数
参数描述
ADUC832BCPZ-REEL 功能描述:IC MCU 62K FLASH ADC/DAC 56LFCSP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC8xx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA，UART/USART 外围设备:欠压检测/复位，LED，POR，PWM，WDT 输入/输出数:16 程序存储器容量:4KB（4K x 8） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
ADUC832BS 制造商:Analog Devices 功能描述:MCU 8-Bit ADuC8xx 8052 CISC 62KB Flash 3.3V/5V 52-Pin MQFP 制造商:Rochester Electronics LLC 功能描述:8BIT CISC 62KB FLASH 16.78MHZ 3.3/5V 52MQFP - Bulk 制造商:Analog Devices 功能描述:8BIT MCU +12BIT ADC LQFP52 832
ADUC832BS-REEL 制造商:Analog Devices 功能描述:MCU 8-Bit ADuC8xx 8052 CISC 62KB Flash 3.3V/5V 52-Pin MQFP T/R
ADUC832BSZ 功能描述:IC ADC/DAC 12BIT W/MCU 52MQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC8xx 标准包装:250 系列:56F8xxx 核心处理器:56800E 芯体尺寸:16-位 速度:60MHz 连通性:CAN，SCI，SPI 外围设备:POR，PWM，温度传感器，WDT 输入/输出数:21 程序存储器容量:40KB（20K x 16） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:6K x 16 电压 - 电源 (Vcc/Vdd):2.25 V ~ 3.6 V 数据转换器:A/D 6x12b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:48-LQFP 包装:托盘 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
ADUC832BSZ-REEL 功能描述:IC MCU 62K FLASH ADC/DAC 52MQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC8xx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA，UART/USART 外围设备:欠压检测/复位，LED，POR，PWM，WDT 输入/输出数:16 程序存储器容量:4KB（4K x 8） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*