参数资料
型号: DS2152L+
厂商: Maxim Integrated Products
文件页数: 20/97页
文件大小: 0K
描述: IC TXRX T1 1CHIP ENHNCD 100-LQFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 90
功能: 单芯片收发器
接口: T1
电路数: 1
电源电压: 4.75 V ~ 5.25 V
电流 - 电源: 75mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 管件
包括: DSX-1 和 CSU 线路补偿发生器,HDLC 控制器,带内回路代码发生器和检测器
产品目录页面: 1429 (CN2011-ZH PDF)
DS2152
27 of 97
CCR4: COMMON CONTROL REGISTER 4 (Address = 11 Hex)
(MSB)
(LSB)
RSRE
RPCSI
RFSA1
RFE
RFF
THSE
TPCSI
TIRFS
SYMBOL
POSITION NAME AND DESCRIPTION
RSRE
CCR4.7
Receive Side Signaling Reinsertion Enable. See Section 8.2 for
details.
0 = do not re-insert signaling bits into the data stream presented at the
RSER pin
1 = re-insert the signaling bits into data stream presented at the RSER
pin
RPCSI
CCR4.6
Receive Per-Channel Signaling Insert. See Section 8.2 for more
details.
0 = do not use RCHBLK to determine which channels should have
signaling re-inserted
1 = use RCHBLK to determine which channels should have signaling
re-inserted
RFSA1
CCR4.5
Receive Force Signaling All 1s. See Section 8.2 for more details.
0 = do not force extracted robbed-bit signaling bit positions to a 1
1 = force extracted robbed-bit signaling bit positions to a 1
RFE
CCR4.4
Receive Freeze Enable. See Section 8.2 for details.
0 = no freezing of receive signaling data will occur
1 = allow freezing of receive signaling data at RSIG (and RSER if
CCR4.7 = 1).
RFF
CCR4.3
Receive Force Freeze. Freezes receive side signaling at RSIG (and
RSER if CCR4.7 = 1); will override Receive Freeze Enable (RFE). See
Section 8.2 for details.
0 = do not force a freeze event
1 = force a freeze event
THSE
CCR4.2
Transmit Hardware Signaling Insertion Enable. See Section 8.2 for
details.
0 = do not insert signaling from the TSIG pin into the data stream
presented at the TSER pin
1 = insert the signaling from the TSIG pin into data stream presented at
the TSER pin
TPCSI
CCR4.1
Transmit Per-Channel Signaling Insert. See Section 8.2 for details.
0 = do not use TCHBLK to determine which channels should have
signaling inserted from TSIG
1 = use TCHBLK to determine which channels should have signaling
inserted from TSIG
TIRFS
CCR4.0
Transmit Idle Registers (TIR) Function Select. See Section 9 for
timing details.
0 = TIRs define in which channels to insert idle code
1 = TIRs define in which channels to insert data from RSER (i.e., Per-
Channel Loopback function)
相关PDF资料
PDF描述
DS2153Q-A7+T&R IC TXRX E1 1-CHIP 5V 44-PLCC
DS2154LNA2+ IC TXRX E1 5V 100-LQFP
DS2154L IC TXRX E1 1CHIP 5V ENH 100-LQFP
DS2155LN IC TXRX T1/E1/J1 1-CHIP 100-LQFP
DS2156LN+ IC TXRX T1/E1/J1 1-CHIP 100-LQFP
相关代理商/技术参数
参数描述
DS2152L+ 功能描述:网络控制器与处理器 IC Enhanced T1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2152L-ES 制造商:DALL 功能描述:
DS2152LN 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2152LN+ 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2153DK 功能描述:KIT DESIGN TXRX E1 DS2153 RoHS:否 类别:编程器,开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像,彩色(RGB) 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP