参数资料
型号: DS21Q59DK
厂商: Maxim Integrated Products
文件页数: 33/76页
文件大小: 0K
描述: KIT DESIGN FOR DS21Q59
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
主要目的: 电信,调帧器和线路接口装置(LIU)
已用 IC / 零件: DS21Q59
DS21Q59 Quad E1 Transceiver
39 of 76
13.
PRBS GENERATION AND DETECTION
The DS21Q59 can transmit and receive the 2
15 - 1 PRBS pattern. This PRBS pattern complies with ITU-T O.151
specifications. The PRBS pattern can be unframed (in all 256 bits of the frame), framed (in all time slots except
TS0), or in any single time slot. Register CCR5 contains the control bits for configuring the transmit and receives
PRBS functions. See Table 13-A and Table 13-B for selecting the transmit and receive modes of operation. In
transmit and receive mode 1 operation, the transmit- and receive-channel monitor-select bits of registers CCR3
and CCR4 have an alternate use. When this mode is selected, these bits determine which time slot transmits
and/or receives the PRBS pattern.
SR2.0 indicates when the receiver has synchronized to the PRBS pattern. The PRBS synchronizer remains in sync
until it experiences six or more bit errors within a 64-bit span. Choosing any receive mode other than NORMAL
causes the 16-bit E-bit error counter—EBCR1 and EBCR2—to be reconfigured for counting PRBS errors.
User-definable outputs OUTA or OUTB can be configured to output a pulse for every bit error received. See
Section 20 and Table 20-A for details. This signal can be used with external circuitry to keep track of bit-error rates
during PRBS testing. Once synchronized, any bit errors received cause a positive-going pulse, synchronous with
RCLK.
Table 13-A. Transmit PRBS Mode Select
TPRBS1
(CCR5.3)
TPBRS0
(CCR5.2)
MODE
0
Mode 0: Normal (PRBS disabled)
0
1
Mode 1: PRBS in TSx. PRBS pattern is transmitted in a single time slot (TS). In this mode, the
transmit-channel monitor-select bits in register CCR3 are used to select a time slot in which to
transmit the PRBS pattern.
1
0
Mode 2: PRBS in all but TS0. PRBS pattern is transmitted in time slots 1 through 31.
1
Mode 3: PRBS unframed. PRBS pattern is transmitted in all time slots.
Table 13-B. Receive PRBS Mode Select
RPRBS1
(CCR5.1)
RPBRS0
(CCR5.0)
MODE
0
Mode 0: Normal (PRBS disabled)
0
1
Mode 1: PRBS in TSx. PRBS pattern is received in a single time slot (TS). In this mode, the
receive-channel monitor-select bits in register CCR4 are used to select a time slot in which to
receive the PRBS pattern.
1
0
Mode 2: PRBS in all but TS0. PRBS pattern is received in time slots 1 through 31.
1
Mode 3: PRBS unframed. PRBS pattern is received in all time slots.
相关PDF资料
PDF描述
RCM28DCTH CONN EDGECARD 56POS DIP .156 SLD
EET-ED2D152EA CAP ALUM 1500UF 200V 20% SNAP
RCM28DCTD CONN EDGECARD 56POS DIP .156 SLD
PLE0G681MDO1 CAP ALUM 680UF 4V 20% RADIAL
PLE0E561MCO1 CAP ALUM 560UF 2.5V 20% RADIAL
相关代理商/技术参数
参数描述
DS21Q59L 功能描述:网络控制器与处理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q59L+ 功能描述:网络控制器与处理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q59LN 功能描述:网络控制器与处理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q59LN+ 功能描述:网络控制器与处理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21S07A 制造商:Maxim Integrated Products 功能描述: