- 您现在的位置：买卖IC网 > PDF目录1834 > LTC4099EUDC#PBF (Linear Technology)IC USB PWR MANAGER/CHRGR 20-QFN PDF资料下载
参数资料
| 型号： | LTC4099EUDC#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 20/36页 |
| 文件大小： | 0K |
| 描述： | IC USB PWR MANAGER/CHRGR 20-QFN |
| 标准包装： | 91 |
| 系列： | PowerPath™ |
| 功能： | 电源管理 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 4.35 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-WFQFN 裸露焊盘 |
| 供应商设备封装： | 20-QFN（3x4） |
| 包装： | 管件 |
| 产品目录页面： | 1341 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
LTC4099
OPERATION
Overtemperature Battery Conditioner
Since Li-Ion batteries deteriorate with full voltage and
high temperature, the LTC4099 contains an automatic
battery conditioner circuit that reduces the battery volt-
age if both high temperature and high voltage are present
simultaneously.
Recall that battery charging is inhibited if the thermistor
temperature reaches 45°C. If the thermistor temperature
climbs above 60°C, and the battery conditioner circuit is
enabled, an internal load of approximately 180mA is ap-
plied to BAT. Once the battery voltage drops to 3.9V, or the
thermistor reading drops below 58°C, the internal load is
disabled. Battery charging resumes once the thermistor
temperature drops below 42°C.
When activated via the I 2 C port, the battery conditioner
operates whether or not external power is available,
charging has terminated or charging has been disabled
by I 2 C control.
Note that this circuit can dissipate significant power inside
the LTC4099. To prevent an excessive temperature rise
of the LTC4099, the LTC4099 reduces discharge current
as needed to prevent a junction temperature rise above
120°C.
Thermal Regulation
To prevent thermal damage to the LTC4099 or surrounding
components during normal charging, an internal thermal
feedback loop will automatically decrease the programmed
charge current if the die temperature rises to 105°C. This
thermal regulation technique protects the LTC4099 from
excessive temperature due to high power operation or high
ambient thermal conditions, and allows the user to push
the limits of the power handling capability with a given
circuit board design. The benefit of the LTC4099 thermal
regulation loop is that charge current can be set according
to actual, rather than worst-case, conditions for a given
application with the assurance that the charger will auto-
matically reduce the current in worst-case conditions.
The thermal regulation set-point can be adjusted down to
85°C from the default 105°C setting using the I 2 C port, as
explained in the Input Data section.
Overvoltage Protection
The LTC4099 can protect itself from the inadvertent ap-
plication of excessive voltage to V BUS or WALL with just
two external components: an N-channel MOSFET and a
6.2k resistor. The maximum safe overvoltage magnitude
will be determined by the choice of the external FET and
its associated drain breakdown voltage.
The overvoltage protection circuit consists of two pins. The
first, OVSENS, is used to measure the externally applied
voltage through an external resistor. The second, OVGATE,
is an output used to drive the gate pin of the external FET.
When OVSENS is below 6V, an internal charge pump will
drive OVGATE to approximately 1.88 ? OVSENS. This will
enhance the N-channel FET and provide a low impedance
connection to V BUS or WALL which will, in turn, power
the LTC4099. If OVSENS should rise above 6V due to a
fault or use of an incorrect wall adapter, OVGATE will be
pulled to GND, disabling the external FET and, therefore,
protecting the LTC4099. When the voltage drops below
6V again, the external FET will be re-enabled.
See the Applications Information section for examples of
multiple input protections, reverse input protection and
recommended components.
Suspend LDO
The LTC4099 provides a small amount of power to V OUT
in suspend mode by including an LDO from V BUS to V OUT .
This LDO will prevent the battery from running down when
the portable product has access to a suspended USB port.
Regulating at 4.6V, this LDO only becomes active when
the internal switching converter is disabled. To remain
compliant with the USB specification, the input to the LDO
is current-limited so that it will not exceed the low power
or high power suspend specification. If the load on V OUT
exceeds the suspend current limit, the additional current
will come from the battery via the ideal diodes. The sus-
pend LDO sends a scaled copy of the V BUS current to the
CLPROG pin, which will servo to a maximum voltage of
approximately 100mV. Thus, the high power and low power
suspend settings are related to the levels programmed by
the same CLPROG resistor for the 100mA, 500mA and
other switching power path settings. Command bits, I LIM2
4099fd
0
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4100EG#TR | IC CHARGER SMART BATTERY 24-SSOP |
| LTC4101EG#PBF | IC CNTRLR BATT CHRG 24-SSOP |
| LTC4110EUHF#TRPBF | IC BATTERY BACKUP MANAGER 38-QFN |
| LTC4150IMS#TRPBF | IC COUNTER/GAUGE GAS/BATT 10MSOP |
| LTC4155IUFD#TRPBF | IC I2C POWER MANAGER DUAL 28QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4100 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Smart Battery System Manager Available in 48-Lead TSSOP Package |
| LTC4100_09 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Smart Battery Charger Controller |
| LTC4100EG | 功能描述:IC SMART BATTERY CHARGER 24-SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性，锂离子，镍镉，镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR) |
| LTC4100EG#PBF | 功能描述:IC SMART BATTERY CHARGER 24-SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 其它有关文件:STC3100 View All Specifications 特色产品:STC3100 - Battery Monitor IC 标准包装:4,000 系列:- 功能:燃料，电量检测计/监控器 电池化学:锂离子（Li-Ion） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MiniSO 包装:带卷 (TR) 其它名称:497-10526-2 |
| LTC4100EG#TR | 功能描述:IC CHARGER SMART BATTERY 24-SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性，锂离子，镍镉，镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。