- 您现在的位置：买卖IC网 > PDF目录16296 > LTC4110EUHF#PBF (Linear Technology)IC BATTERY BACKUP MANAGER 38-QFN PDF资料下载
参数资料
| 型号： | LTC4110EUHF#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 18/52页 |
| 文件大小： | 0K |
| 描述： | IC BATTERY BACKUP MANAGER 38-QFN |
| 标准包装： | 52 |
| 功能： | 备份管理 |
| 电池化学： | 铅酸，锂离子，锂聚合物，镍镉，镍氢，超级电容器 |
| 电源电压： | 4.5 V ~ 19 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 38-WFQFN 裸露焊盘 |
| 供应商设备封装： | 38-QFN（5x7） |
| 包装： | 管件 |
| 产品目录页面： | 1341 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页
LTC4110
OPERATION
SMBUS WAKE-UP CHARGE STATE
The battery will be charged with a ?xed “wake-up” current
regardless of previous ChargingCurrent() and Charging-
Voltage() register values during wake-up charging. The cur-
rent is identical to the preconditioning charge current which
is programmed with an external resistor through the I PCC
pin. The wake-up timer has the same period as t TIMEOUT ,
typically 175sec (see t TIMEOUT ).
The following conditions must be met to allow wake-up
charge of the battery:
? The SafetySignal must be RES_COLD, RES_IDEAL, or
RES_UR.
? AC must be present. This is quali?ed by DCDIV > V AC
+ V ACH and DCIN above UVLO.
? Wake-up charge initiates if a battery does not write
non-zero values to ChargingCurrent() and Chargin-
Voltage() registers when AC power is applied and a
battery is present or when AC is present and a battery
is subsequently connected.
The following conditions will terminate the wake-up charge
state and end charge attempts, unless otherwise noted.
? The t TIMEOUT period is reached (see t TIMEOUT ) when
the SafetySignal is RES_COLD or RES_UR. The state
machine will go to the SMBus OFF state. The CHG_FLT
bit is not set.
? The SafetySignal is registering RES_HOT. The state
machine will go to the SMBus OFF state.
? The SafetySignal is registering RES_OR. The state
machine will go to the reset state.
? The LTC4110 will leave the wake-up charge state and
go into the SMBus preconditioning charge state if the
ChargingCurrent() AND ChargingVoltage() registers
have been written to non-zero values.
? The AC power is no longer present (DCDIV < V AC or
DCIN below UVLO). The state machine will go to the
reset state.
? CHARGE_INHIBIT is set in the BBuControl() register.
Charge is stopped, however, the wake-up timer is not
paused. Clearing CHARGE_INHIBIT will enable the
LTC4110 to resume charging.
? There is insuf?cient DCIN voltage to charge the battery
as determined by the internal UVLO. This causes the
state machine to enter the reset state and stop all charge
activity. The LTC4110 will resume wake-up charging when
there is suf?cient DCIN voltage to charge the battery.
? The CAL_START bit in the BBuControl() register is set.
Charge is stopped and the LTC4110 enters the calibra-
tion state.
? Writing a zero value to either the ChargingVoltage() or
ChargingCurrent() register. The state machine will go
to the SMBus OFF state.
? RESET_TO_ZERO is set in the BBuControl() register.
Charge is stopped; the SMBus OFF State is entered.
SMBUS PRECONDITIONING CHARGE STATE
During the SMBus preconditioning charge state, the charger
will be operating in the preconditioning charge current
limit. The following conditions must be met in order to
allow SMBus preconditioning charge to start:
? The ChargingVoltage() AND ChargingCurrent() registers
must be written to non-zero values. The LTC4110 will
not directly report the status of these registers. The
battery needs only write one pair of ChargingVoltage()
and ChargingCurrent() registers to stay in this state. The
t TIMEOUT timer is not operational in SMBus precondition-
ing charge state.
? The SafetySignal must be RES_COLD, RES_IDEAL, or
RES_UR.
? AC must be present and suf?cient. This is quali?ed by
DCDIV > V AC + V ACH and DCIN > UVLO.
The following conditions will affect the SMBus precondi-
tioning charge state as speci?ed below:
? The ALARM_INHIBITED becomes set in the
ChargerStatus() register. The state machine will go to
?
The SafetySignal is registering RES_HOT. Charge is
stopped; the SMBus OFF state is entered.
the SMBus OFF state.
4110fb
18
相关PDF资料 |
PDF描述 |
|---|---|
| 3-6754412-6 | CA,XG,MTRJ-SC |
| ECO-S2DB102EA | CAP ALUM 1000UF 200V 20% SNAP |
| 3-6754411-6 | CA,XG,MTRJ-SC |
| RCM10DRYI-S13 | CONN EDGECARD 20POS .156 EXTEND |
| ECO-S2WB181DA | CAP ALUM 180UF 450V 20% SNAP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4110EUHF-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:Battery Backup System Manager |
| LTC4110EUHF-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Battery Backup System Manager |
| LTC4120IUD#PBF | 制造商:Linear Technology 功能描述:BATTERY CHARGER, 400MA, QFN-16, Battery Type:Li-Ion, Li-Polymer, Input Voltage:4 |
| LTC4150 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage, High-Side Current Sense |
| LTC4150_1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Coulomb Counter/ Battery Gas Gauge |
发布紧急采购，3分钟左右您将得到回复。