参数资料
型号: PM4314
厂商: PMC-SIERRA INC
元件分类: 数字传输电路
英文描述: QUAD T1/E1 LINE INTERFACE DEVICE
中文描述: DATACOM, PCM TRANSCEIVER, PQFP128
封装: 14 X 20 MM, PLASTIC, QFP-128
文件页数: 53/170页
文件大小: 823K
代理商: PM4314
PM4314 QDSX
DATA SHEET
PMC-950857
ISSUE 5
QUAD T1/E1 LINE INTERFACE DEVICE
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
41
reference clock. When an 8X reference is provided, the CLKO1X output is active,
and carries the internal 8X reference clock divided by 8.
9.7
Pseudo-Random Bit Sequence Generator (PRSG)
The Pseudo-Random Bit Sequence Generator (PRSG) generates an unframed
215-1 test sequence as defined in Recommendation O.151. The PRSG can be
enabled to overwrite the unipolar input transmit data when configured to be in the
transmit data stream or the recovered unipolar receive data when configured to
be in the receive data stream. The microprocessor can force the PRSG to insert
single bit errors in the pseudorandom data for diagnostic purposes.
The PRSG can be configured to generate either an inverted or a noninverted
215-1 pseudorandom bit sequence (PRBS). An inverted 215-1 PRBS will
contain at most 15 consecutive zeroes, while a non-inverted 215-1 PRBS will
contain at most 14 consecutive zeroes.
9.8
Inband Loopback Code Generator (XIBC)
The Inband Loopback Code Generator function is provided by the XIBC block.
This block generates a stream of inband loopback codes to be inserted into a
DS-1 data stream. The stream consists of continuous repetitions of a specific
code. The contents of the code and its length are programmable from 3 to 8 bits.
The XIBC can be enabled to overwrite the unipolar input transmit data when
configured to be in the transmit data stream or the recovered unipolar receive
data when configured to be in the receive data stream.
9.9
B8ZS/HDB3/AMI Line Encoder (LCODE)
The B8ZS/HDB3/AMI line encoding function is provided by the LCODE block.
This block will encode single-rail data inputs into bipolar B8ZS, HDB3, or AMI
format. For DSX-1 applications, B8ZS line encoding is selected by default. For
E1 applications, HDB3 line encoding is selected by default. The microprocessor
may instruct the LCODE block to insert line code violations for diagnostic
purposes.
9.10 Digital Jitter Attenuator (DJAT)
The Digital Jitter Attenuator (DJAT) function is used to attenuate jitter in the
transmit clock when required. The DJAT block receives jittered data and stores
相关PDF资料
PDF描述
PM4314-RI QUAD T1/E1 LINE INTERFACE DEVICE
PM4318 OCTAL E1/T1/J1 LINE INTERFACE DEVICE
PM4318-BI OCTAL E1/T1/J1 LINE INTERFACE DEVICE
PM4319 OCTAL T1/E1/J1 Short Haul Line Interface Device
PM4325 Octal Short Haul T1/E1/J1 Low Latency Transport Line Interface
相关代理商/技术参数
参数描述
PM4314-RI 制造商:PMC-Sierra 功能描述:
PM43-150M 功能描述:固定电感器 15uH 20% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
PM43-150M-RC 功能描述:固定电感器 15uH 20% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
PM4318 制造商:PMC 制造商全称:PMC 功能描述:OCTAL E1/T1/J1 LINE INTERFACE DEVICE