参数资料
型号: S1R72803F00A100
元件分类: 微控制器/微处理器
英文描述: 1 CHANNEL(S), 400M bps, SERIAL COMM CONTROLLER, PQFP100
封装: 0.40 MM PITCH, PLASTIC, QFP20-184
文件页数: 63/115页
文件大小: 833K
代理商: S1R72803F00A100
S1R72803F00A
EPSON
47
Address Register Name
Bit Symbol
R/W
Description
H.Rst S.Rst B.Rst
0x06
PhyIntStat
7: SubGap
R(W)
0: None
1: Sub Action Gap Detected
6: ArbGap
R(W)
0: None
1: ArbtrationResetGapDetected
5:
0:
1:
4:
0:
1:
0x00
3:
0:
1:
2: Phy_int
R(W)
0: None
1: PHY Interrupt Detected
1: PhyWrDone
R(W)
0: None
1: PHY Register Write Done
0: PhyRdDone
R(W)
0: None
1: PHY Register Read Done
Address Register Name
Bit Symbol
R/W
Description
H.Rst S.Rst B.Rst
0x07
(Reserved)
7:
0:
1:
6:
0:
1:
5:
0:
1:
4:
0:
1:
0x00
3:
0:
1:
2:
0:
1:
0:
1:
0:
1:
PHY Interrupt Status Register
The value of each bit of this register indicates the status of a corresponding interrupt source. If these bits become
“1” when the associated bit of the PHYIntEnb Register is “1”, this register asserts the interrupt signal to the CPU.
The CPU reads this register after receiving the interrupt signal to locate an interrupt source. By writing the read
value again, it clears these bits.
Bit 7 Sub Action Gap Detected
When a Transmit Action Gap is detected in the PHY status of the PHY/LINK interface, this bit becomes “1”.
Bit6 Arbitration Reset Gap Detected
When an Arbitration Reset Gap is detected in the PHY status of the PHY/LINK interface, this bit becomes “1”.
Bit5 Reserved
Bit4 Reserved
Bit3 Reserved
Bit2 PHY/LINK Interface Interrupt Detected
When a PHY_Interrupt is detected in the PHY status of the PHY/LINK interface, this bit becomes “1”.
This status indicates the PHY is put under one of the following.
1) In most instances, a loop is created in the cable topology.
2) Cable power is insufficient.
3) A bias change is detected.
Bit1 PHY Register Write Done
When the write access of the PHY Register is complete, this bit becomes “1”.
Bit0 PHY Register Read Done
When read data is stored in the PHYRdStat Register at the time of read access of the PHY Register, this bit
becomes “1”.
相关PDF资料
PDF描述
S1R72C05B08 UNIVERSAL SERIAL BUS CONTROLLER, PBGA121
S1R72C05B10 UNIVERSAL SERIAL BUS CONTROLLER, PBGA121
S1R72V17B00A UNIVERSAL SERIAL BUS CONTROLLER, PBGA60
S1R72V18B10 UNIVERSAL SERIAL BUS CONTROLLER, PBGA121
S1R72V27B05 UNIVERSAL SERIAL BUS CONTROLLER, PBGA60
相关代理商/技术参数
参数描述
S1R72803F00A200 功能描述:IC LINK CTRLR 1394 IDE-66 184QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72805F00A2 功能描述:IC LINK CTRLR 1394 IDE100 100QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72901F00A 功能描述:IC LINK CTRLR/PHY 1394 100-QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72901F00A200 功能描述:IC PHY CONT 2PORT 1394A 100-QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72C05 制造商:EPSON 制造商全称:EPSON 功能描述:Support for control, bulk, interrupt, and isochronous transfers