参数资料
型号: SI5338N-AXXXXXGM
厂商: SILICON LABORATORIES
元件分类: 时钟产生/分配
英文描述: 700 MHz, PROC SPECIFIC CLOCK GENERATOR, QCC24
封装: 4 X 4 MM, ROHS COMPLIANT, MO-220VGGD-8, QFN-24
文件页数: 13/42页
文件大小: 380K
代理商: SI5338N-AXXXXXGM
Si5338
20
Rev. 1.0
3.5.1. Ordering a Custom NVM Configuration
The Si5338 is orderable with a factory-programmed
custom NVM configuration. This is the simplest way of
using the Si5338 since it generates the desired output
frequencies at power-up or after a power-on reset
(POR). This default configuration can be reconfigured in
RAM through the I2C interface after power-up (see
Custom 7-bit I2C addresses may also be requested.
Note that for the A/B/C devices, the I2C LS bit address
is the logical “or” of the I2C address LS bit in Register 27
and the state of the I2C_LSB pin. If I2C_LSB pin
functionality is required, custom I2C addresses may
only be even numbers. For all other variants of the
device, custom I2C addresses may be even or odd
numbers. See “AN411: Configuring the Si5338” for
more details.
The first step in ordering a custom device is generating
an NVM file which defines the input and output clock
frequencies and signal formats. This is easily done
using the ClockBuilder Desktop software (see "3.1.1.
GUI based software generates an NVM file, which is
used by the factory to manufacture custom parts. Each
custom part is marked with a unique part number
identifying the specific configuration (e.g., Si5338C-
A00100-GM). Consult your local sales representative
for more details on ordering a custom Si5338.
3.5.2. Creating a New Configuration for RAM
Any Si5338 device can be configured by writing to
registers in RAM through the I2C interface. A non-
factory programmed device must be configured in this
manner.
The first step is to determine all the register values for
the required configuration. This can be accomplished by
one of two methods.
1. Create a device configuration (register map) using
ClockBuilder Desktop (v3.0 or later; see "3.1.1.
a. Configure the frequency plan.
b. Configure the output driver format and supply
voltage.
c. Configure frequency and/or phase inc/dec (if
desired).
d. Configure spread spectrum (if desired).
e. Configure for zero-delay mode (if desired,
f.
If needed go to the Advanced tab and make
additional configurations.
g. Save the configuration using the Options >
Save Register Map File or Options > Save C
code Header.
2. Create a device configuration, register by register,
using AN411.
3.5.3. Writing a Custom Configuration to RAM
Writing a new configuration (register map) to the RAM
consists of pausing the LOL state-machine, writing new
values to the IC accounting for the write-allowed mask
(see AN411, “14. Si5338 Registers”), validating the
input clock or crystal, locking the PLL to the input with
the new
configuration, restarting
the
LOL
state-
machine, and calibrating the VCO for robust operation
across
temperature.
The
flow
chart
in
enumerates the details:
Note: The write-allowed mask specifies which bits must be
read and modified before writing the entire register
byte (a.k.a. read-modify-write). “AN428: Jump Start: In-
System, Flash-Based Programming for Silicon Labs’
Timing Products” illustrates the procedure defined in
Section 3.5.2 with ANSI C code.
相关PDF资料
PDF描述
SL28540ALCT OTHER CLOCK GENERATOR, QCC56
SL5504 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER
SL5582.3S 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER
SLA-360MTT32S T-1 SINGLE COLOR LED, YELLOW GREEN, 3.1 mm
SLA-570LT3FXH T-1 3/4 SINGLE COLOR LED, RED, 5 mm
相关代理商/技术参数
参数描述
SI5338N-B01504-GM 制造商:Silicon Laboratories Inc 功能描述:CLOCK - Bulk
SI5338N-B01504-GMR 制造商:Silicon Laboratories Inc 功能描述:CLOCK - Tape and Reel
SI5338N-B01552-GM 制造商:Silicon Laboratories Inc 功能描述:CLOCK - Bulk
SI5338N-B01552-GMR 制造商:Silicon Laboratories Inc 功能描述:CLOCK - Tape and Reel
SI5338N-B01598-GM 制造商:Silicon Laboratories Inc 功能描述:CLOCK - Bulk