- 您现在的位置：买卖IC网 > PDF目录68428 > W25X20BLSNIG (WINBOND ELECTRONICS CORP) 2M X 1 FLASH 2.7V PROM, PDSO8 PDF资料下载
参数资料
| 型号： | W25X20BLSNIG |
| 厂商： | WINBOND ELECTRONICS CORP |
| 元件分类： | PROM |
| 英文描述： | 2M X 1 FLASH 2.7V PROM, PDSO8 |
| 封装： | 0.150 INCH, GREEN, PLASTIC, SOIC-8 |
| 文件页数： | 11/53页 |
| 文件大小： | 2041K |
| 代理商： | W25X20BLSNIG |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页
W25X10BL/20BL/40BL
Publication Release Date: October 14, 2009
- 19 -
Preliminary -- Revision A
9.2.7
Write Status Register (01h)
The Write Status Register instruction allows the Status Register to be written. Only non-volatile Status
Register bits SRP, TB, BP2, BP1, BP0 (bits 7 thru 2 of Status Register) can be written to. All other
Status Register bit locations are read-only and will not be affected by the Write Status Register
instruction. The Status Register bits are shown in figure 3 and described in 9.1.
To write non-volatile Status Register bits, a standard Write Enable (06h) instruction must previously
have been executed for the device to accept the Write Status Register Instruction (Status Register bit
WEL must equal 1). Once write enabled, the instruction is entered by driving /CS low, sending the
instruction code “01h”, and then writing the status register data byte as illustrated in figure 8.
To write volatile Status Register bits, a Write Enable for Volatile Status Register (50h) instruction must
have been executed prior to the Write Status Register instruction (Status Register bit WEL remains 0).
Upon power off, the volatile Status Register bit values will be lost, and the non-volatile Status Register
bit values will be restored when power on again.
To complete the Write Status Register instruction, the /CS pin must be driven high after the eighth bit
of data that is clocked in. If this is not done the Write Status Register instruction will not be executed.
During non-volatile Status Register write operation (06h combined with 01h), after /CS is driven high,
the self-timed Write Status Register cycle will commence for a time duration of tW (See AC
Characteristics). While the Write Status Register cycle is in progress, the Read Status Register
instruction may still be accessed to check the status of the BUSY bit. The BUSY bit is a 1 during the
Write Status Register cycle and a 0 when the cycle is finished and ready to accept other instructions
again. After the Write Status Register cycle has finished, the Write Enable Latch (WEL) bit in the
Status Register will be cleared to 0.
During volatile Status Register write operation (50h combined with 01h), after /CS is driven high, the
Status Register bits will be refreshed to the new values within the time period of tSHSL2 (See AC
Characteristics). BUSY bit will remain 0 during the Status Register bit refresh period.
Please refer to 9.1 for detailed Status Register Bit descriptions. Factory default for all status Register
bits are 0.
.
相关PDF资料 |
PDF描述 |
|---|---|
| W25X20BLZPIG | 2M X 1 FLASH 2.7V PROM, PDSO8 |
| W25X32AVDAIZ | 4M X 8 FLASH 2.7V PROM, PDIP8 |
| W25X40-VSNI | 4M X 1 FLASH 2.7V PROM, PDSO8 |
| W25X80-VSNI-G | 8M X 1 FLASH 2.7V PROM, PDSO8 |
| W25X40BVDAIG | 4M X 1 FLASH 2.7V PROM, PDIP8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| W25X20BLZPIG | 制造商:WINBOND 制造商全称:Winbond 功能描述:1M-BIT, 2M-BIT AND 4M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI |
| W25X20BV | 制造商:WINBOND 制造商全称:Winbond 功能描述:1M-BIT, 2M-BIT AND 4M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI |
| W25X20BVSNIG | 功能描述:IC SPI FLASH 2MBIT 8SOIC RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:1,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (512 x 8) 速度:400kHz 接口:I²C，2 线串口 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.173"，4.40mm 宽） 供应商设备封装:8-MFP 包装:带卷 (TR) |
| W25X20BVZPIG | 功能描述:IC SPI FLASH 2MBIT 8WSON RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:1,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (512 x 8) 速度:400kHz 接口:I²C，2 线串口 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.173"，4.40mm 宽） 供应商设备封装:8-MFP 包装:带卷 (TR) |
| W25X20CLSNIG | 功能描述:IC FLASH SPI 2MBIT 8SOIC RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:2,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 异步 存储容量:256K (32K x 8) 速度:15ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:28-TSSOP（0.465"，11.8mm 宽） 供应商设备封装:28-TSOP 包装:带卷 (TR) 其它名称:71V256SA15PZGI8 |
发布紧急采购，3分钟左右您将得到回复。