参数资料
型号: ADUC7129BSTZ126-RL
厂商: Analog Devices Inc
文件页数: 40/92页
文件大小: 0K
描述: IC DAS MCU ARM7 ADC/DDS 80-LQFP
产品培训模块: ARM7 Applications & Tools
Intro to ARM7 Core & Microconverters
Process Control
Direct Digital Synthesis Tutorial Series (1 of 7): Introduction
标准包装: 1
系列: MicroConverter® ADuC7xxx
核心处理器: ARM7
芯体尺寸: 16/32-位
速度: 41.78MHz
连通性: EBI/EMI,I²C,SPI,UART/USART
外围设备: PLA,POR,PWM,PSM,温度传感器,WDT
输入/输出数: 38
程序存储器容量: 126KB(63K x 16)
程序存储器类型: 闪存
RAM 容量: 8K x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 3.6 V
数据转换器: A/D 10x12b; D/A 1x10b
振荡器型: 内部
工作温度: -40°C ~ 125°C
封装/外壳: 80-LQFP
包装: 标准包装
其它名称: ADUC7129BSTZ126-RLDKR
ADuC7128/ADuC7129
Rev. 0 | Page 45 of 92
OTHER ANALOG PERIPHERALS
DAC
The ADuC7128/ADuC7129 feature a 10-bit current DAC that
can be used to generate user-defined waveforms or sine waves
generated by the DDS. The DAC consists of a 10-bit IDAC
followed by a current-to-voltage conversion.
The current output of the IDAC is passed through a resistor and
capacitor network where it is both filtered and converted to a
voltage. This voltage is then buffered by an op amp and passed
to the line driver.
For the DAC to function, the internal 2.5 V voltage reference
must be enabled and driven out onto an external capacitor,
REFCON = 0x01.
Once the DAC is enabled, users see a 5 mV drop in the internal
reference value. This is due to bias currents drawn from the
reference used in the DAC circuitry. It is recommended that if
using the DAC, it be left powered on to avoid seeing variations
in ADC results.
Table 49. DACCON MMR Bit Designations
Bit
Value
Description
10:9
Reserved. These bits should be written to 0 by the user.
8
Reserved. This bit should be written to 0 by the user.
7
Reserved. This bit should be written to 0 by the user.
6
Reserved. This bit should be written to 0 by the user.
5
Output Enable. This bit operates in all modes. In Line Driver mode, this bit should be set.
Set by user to enable the line driver output.
Cleared by user to disable the line driver output. In this mode the line driver output is high impedance.
4
Single-Ended or Differential Output Control.
Set by user to operate in differential mode, the output is the differential voltage between LD1TX and LD2TX. The voltage
output range is VREF/2 ± VREF/2.
Cleared by user to reference the LD1TX output to AGND. The voltage output range is AVDD/2 ± VREF/2.
3
Reserved. This bit should be set to 0 by the user.
Operation Mode Control. This bit selects the mode of operation of the DAC.
00
Power-Down.
01
Reserved.
10
Reserved.
2:1
11
DDS and DAC Mode. Selected by DACEN.
0
DAC Update Rate Control. This bit has no effect when in DDS mode.
Set by user to update the DAC on the negative edge of Timer1. This allows the user to use any one of the core CLK, OSC
CLK, baud CLK, or user CLK and divide these down by 1, 16, 256, or 32,768. A user can do waveform generation by
writing to the DAC data register from RAM and updating the DAC at regular intervals via Timer1.
Cleared by user to update the DAC on the negative edge of HCLK.
相关PDF资料
PDF描述
D38999/20FC8SC CONN RCPT 8POS WALL MNT W/SCKT
D38999/26WC8PB CONN PLUG 8POS STRAIGHT W/PINS
MS27473E18A11P CONN PLUG 11POS STRAIGHT W/PINS
AT32UC3C2512C-Z2ZR IC MCU AVR32 512K FLASH 64QFN
MS27484E10B98P CONN PLUG 6POS STRAIGHT W/PINS
相关代理商/技术参数
参数描述
ADUC7129BSTZ126-RL2 制造商:AD 制造商全称:Analog Devices 功能描述:Precision Analog Microcontroller ARM7TDMI MCU with 12-Bit ADC and DDS DAC
aduc7229bcpz126 制造商:Analog Devices 功能描述:
ADUC7229BCPZ126-RL 制造商:Analog Devices 功能描述:
ADUC812 制造商:AD 制造商全称:Analog Devices 功能描述:MicroConverter⑩, Multichannel 12-Bit ADC with Embedded FLASH MCU
ADUC812_03 制造商:AD 制造商全称:Analog Devices 功能描述:MicroConverter㈢, Multichannel 12-Bit ADC with Embedded Flash MCU