参数资料
型号: DS3131
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: Telecom IC:Other
英文描述: SPECIALTY TELECOM CIRCUIT, PBGA256
封装: 27 X 27 MM, PLASTIC, BGA-256
文件页数: 163/174页
文件大小: 1261K
代理商: DS3131
DS3131
89 of 174
Figure 9-8. Receive Done-Queue Structure
Once the receive DMA is activated (through the RDE control bit in the master configuration register, see
Section 5), it can begin writing data to the done queue. It knows where to write data into the done queue
by reading the write pointer and adding it to the base address to obtain the actual 32-bit address. Once
the DMA has written to the done queue, it increments the write pointer by one dword. A check must be
made to ensure the incremented address does not exceed the receive done queue end address. If the
incremented address exceeds this address, the incremented write pointer is set equal to 0000h (i.e., the
base address).
Status Bits/Interrupts
On writes to the done queue by the DMA, the DMA sets the status bit for the receive DMA done-queue
write (RDQW) in the status register for DMA (SDMA). The host can configure the DMA to either set
this status bit on each write to the done queue or only after multiple (from 2 to 128) writes. The host
controls this by setting the RDQT0 to RDQT2 bits in the receive DMA queues control (RDMAQ)
register. See the description of the RDMAQ register at the end of Section 9.2.4 for more details. The
DMA also checks the receive done-queue host read pointer to ensure an overflow does not occur. If this
does occur, the DMA then sets the status bit for the receive DMA done-queue write error (RDQWE) in
the status register for DMA (SDMA), and it does not write to the done queue nor does it increment the
write pointer. In such a scenario, packets can be lost and unrecoverable. Each of the status bits can also
(if enabled) cause a hardware interrupt to occur. See Section 5 for more details.
Base + 00h
Base + 04h
Base + 08h
Base + 0Ch
Base + 10h
Base + 14h
Base + End Address
Done-Queue DMA Write Pointer
Done-Queue Host Read Pointer
Maximum of 65,536
Done-Queue Descriptors
DMA Readied
Done-Queue Descriptor
DMA Readied
Done-Queue Descriptor
DMA Readied
Done-Queue Descriptor
DMA Readied
Done-Queue Descriptor
Host Processed
Done-Queue Descriptor
Host Processed
Done-Queue Descriptor
Host Processed
Done-Queue Descriptor
相关PDF资料
PDF描述
DS3134 DATACOM, FRAMER, PBGA256
DS3150QN DATACOM, PCM TRANSCEIVER, PQCC28
DS3150Q DATACOM, PCM TRANSCEIVER, PQCC28
DS3150TN DATACOM, PCM TRANSCEIVER, PDIP48
DS3150T DATACOM, PCM TRANSCEIVER, PQFP48
相关代理商/技术参数
参数描述
DS3131DK 功能描述:通信集成电路 - 若干 RoHS:否 制造商:Maxim Integrated 类型:Transport Devices 封装 / 箱体:TECSBGA-256 数据速率:100 Mbps 电源电压-最大:1.89 V, 3.465 V 电源电压-最小:1.71 V, 3.135 V 电源电流:50 mA, 225 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
DS3134 功能描述:IC CTRLR HDLC CHATEAU 256-BGA RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
DS-313PIN 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Miscellaneous
DS-313-PIN 功能描述:信号调节 RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
DS31400 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:8-Input, 14-Output, Dual DPLL Timing IC with Sub-ps Output Jitter