收藏本站
参数资料
型号： EPM2210GF256A5N
厂商： ALTERA CORP
元件分类： PLD
英文描述： FLASH PLD, PBGA256
封装： 17 X 17 MM, 1 MM PITCH, LEAD FREE, FBGA-256
文件页数： 61/108页
文件大小： 1342K
代理商： EPM2210GF256A5N
3–6
Core Version a.b.c variable
Altera Corporation
MAX II Device Handbook, Volume 1
December 2007
In System Programmability
programming, the I/O pins are tri-stated and weakly pulled-up to VCCIO
to eliminate board conflicts. The in-system programming clamp and real-
time ISP feature allow user control of I/O state or behavior during ISP.
For more information, refer to “In-System Programming Clamp” on
page 3–8 and “Real-Time ISP” on page 3–8.
These devices also offer an ISP_DONE bit that provides safe operation
when in-system programming is interrupted. This ISP_DONE bit, which
is the last bit programmed, prevents all I/O pins from driving until the
bit is programmed.
IEEE 1532 Support
The JTAG circuitry and ISP instruction set in MAX II devices is compliant
to the IEEE 1532-2002 programming specification. This provides
industry-standard hardware and software for in-system programming
among multiple vendor programmable logic devices (PLDs) in a JTAG
chain.
The MAX II 1532 BSDL files will be released on the Altera website when
available.
Jam Standard Test and Programming Language (STAPL)
The Jam STAPL JEDEC standard, JESD71, can be used to program MAX II
devices with in-circuit testers, PCs, or embedded processors. The Jam
byte code is also supported for MAX II devices. These software
programming protocols provide a compact embedded solution for
programming MAX II devices.
f
For more information, refer to the Using Jam STAPL for ISP via an
Embedded Processor chapter in the MAX II Device Handbook.
Programming Sequence
During in-system programming, 1532 instructions, addresses, and data
are shifted into the MAX II device through the TDI input pin. Data is
shifted out through the TDO output pin and compared against the
expected data. Programming a pattern into the device requires the
following six ISP steps. A stand-alone verification of a programmed
pattern involves only stages 1, 2, 5, and 6. These steps are automatically
executed by third-party programmers, the Quartus II software, or the Jam
STAPL and Jam Byte-Code Players.
1.
Enter ISP—The enter ISP stage ensures that the I/O pins transition
smoothly from user mode to ISP mode.
相关PDF资料
PDF描述
EPM2210GF324A3N FLASH PLD, PBGA324
EPM2210GF324A4N FLASH PLD, PBGA324
EPM2210GF324A5N FLASH PLD, PBGA324
EPM7064BFC100-3 EE PLD, 3.5 ns, PBGA100
EPM7064BFC100-5 EE PLD, 3.5 ns, PBGA100
相关代理商/技术参数
参数描述
EPM2210GF256C3 功能描述:CPLD - 复杂可编程逻辑器件 CPLD - MAX II 1700 Macro 204 IO RoHS:否 制造商:Lattice 系列: 存储类型:EEPROM 大电池数量:128 最大工作频率:333 MHz 延迟时间:2.7 ns 可编程输入/输出端数量:64 工作电源电压:3.3 V 最大工作温度:+ 90 C 最小工作温度:0 C 封装 / 箱体:TQFP-100
EPM2210GF256C3N 功能描述:CPLD - 复杂可编程逻辑器件 CPLD - MAX II 1700 Macro 204 IO RoHS:否 制造商:Lattice 系列: 存储类型:EEPROM 大电池数量:128 最大工作频率:333 MHz 延迟时间:2.7 ns 可编程输入/输出端数量:64 工作电源电压:3.3 V 最大工作温度:+ 90 C 最小工作温度:0 C 封装 / 箱体:TQFP-100
EPM2210GF256C4 功能描述:CPLD - 复杂可编程逻辑器件 CPLD - MAX II 1700 Macro 204 IO RoHS:否 制造商:Lattice 系列: 存储类型:EEPROM 大电池数量:128 最大工作频率:333 MHz 延迟时间:2.7 ns 可编程输入/输出端数量:64 工作电源电压:3.3 V 最大工作温度:+ 90 C 最小工作温度:0 C 封装 / 箱体:TQFP-100
EPM2210GF256C4N 功能描述:CPLD - 复杂可编程逻辑器件 CPLD - MAX II 1700 Macro 204 IO RoHS:否 制造商:Lattice 系列: 存储类型:EEPROM 大电池数量:128 最大工作频率:333 MHz 延迟时间:2.7 ns 可编程输入/输出端数量:64 工作电源电压:3.3 V 最大工作温度:+ 90 C 最小工作温度:0 C 封装 / 箱体:TQFP-100
EPM2210GF256C5 功能描述:CPLD - 复杂可编程逻辑器件 CPLD - MAX II 1700 Macro 204 IO RoHS:否 制造商:Lattice 系列: 存储类型:EEPROM 大电池数量:128 最大工作频率:333 MHz 延迟时间:2.7 ns 可编程输入/输出端数量:64 工作电源电压:3.3 V 最大工作温度:+ 90 C 最小工作温度:0 C 封装 / 箱体:TQFP-100
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*