379
Section 15 Serial Communication Interface (SCI, IrDA)
15.1
Overview
The H8S/2138 Series and H8S/2134 Series are equipped with a 3-channel serial communication
interface (SCI). The SCI can handle both asynchronous and clocked synchronous serial
communication. A function is also provided for serial communication between processors
(multiprocessor communication function).
One of the three SCI channels can transmit and receive IrDA communication waveforms based
on IrDA specification version 1.0.
15.1.1
Features
SCI features are listed below.
Choice of asynchronous or synchronous serial communication mode
Asynchronous mode
Serial data communication is executed using an asynchronous system in which
synchronization is achieved character by character
Serial data communication can be carried out with standard asynchronous communication
chips such as a Universal Asynchronous Receiver/Transmitter (UART) or Asynchronous
Communication Interface Adapter (ACIA)
A multiprocessor communication function is provided that enables serial data
communication with a number of processors
Choice of 12 serial data transfer formats
Data length:
7 or 8 bits
Stop bit length:
1 or 2 bits
Parity:
Even, odd, or none
Multiprocessor bit:
1 or 0
Receive error detection: Parity, overrun, and framing errors
Break detection:
Break can be detected by reading the RxD pin level
directly in case of a framing error
Synchronous mode
Serial data communication is synchronized with a clock
Serial data communication can be carried out with other chips that have a synchronous
communication function
One serial data transfer format
Data length:
8 bits
Receive error detection: Overrun errors detected