参数资料
型号: HMC703LP4E
厂商: Hittite Microwave Corporation
文件页数: 18/58页
文件大小: 0K
描述: IC FRACT-N PLL W/SWEEPR 24QFN
标准包装: 1
类型: 整数 N/小数 N 分频
PLL:
输入: CMOS
输出: CMOS
电路数: 1
比率 - 输入:输出: 1:1
差分 - 输入:输出: 是/无
频率 - 最大: 8GHz
除法器/乘法器: 是/无
电源电压: 3.3V,5V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 24-VQFN 裸露焊盘
供应商设备封装: 24-QFN 裸露焊盘(4x4)
包装: 标准包装
其它名称: 1127-1065-6
P
LL
s
-
s
M
T
6 - 25
HMC703LP4E
v02.0813
8 GHz fractional syntHesizer
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 978-250-3373 fax Order On-line at www.hittite.com
Application Support: pll@hittite.com
Bi-Phase Modulation
Phase step is programmed in Reg 0Ah as a fraction of 2π, where 224 = 2π. For example, for bi-phase modulation a
phase step of 180°, program Reg 0Ah= round( (180/360) x 224 = 8388608d = 800000h).
Phase modulation data is input via a “trigger” source, where the trigger is level dependent (Reg 06h[8] = 0), high
trigger advances the phase and low trigger returns the phase.
Phase step control
Phase may also be advanced on the rising edge of the trigger only. Phase step is programmed in Reg 0Ah as a fraction
of 360°, where 224 = 2π. For example, for a 1° phase step, program Reg 0Ah= round( (1/360) x 224 = 46603d =B60Bh)
In summary the following procedure is recommended to configure HMC703LP4E for PM mode:
1.
Lock in fractional mode (Reg 06h[7:5] = 0) to F = fPD x (Reg 03h.Reg 04h).
2.
Program (Reg 0Ah) to the intended phase step.
3.
Change mode to PM (Reg 06h[7:5] = 4).
4.
Change trigger option to edge or level (Reg 06h[8])
5.
select the trigger source Reg 06h[9] = 1, TRIG (pin-6), or Reg 06h[9] = 0 - trigger from sPI write to
frequency sweep Mode
The HMC703LP4E features a built-in sweeper mode, that supports external or automatic triggered sweeps. The
maximum sweep range is only limited by the VCO dynamics and range.
sweeper Mode includes:
a. Automatic 2-Way sweep Mode
INITIAL trigger, ramp, ramp back, ramp, ramp back, ...
selected by writing Reg 06h[7:5] = 7
b. Triggered 2-Way sweep Mode
INITIAL trigger, ramp, wait for trigger, ramp back, wait for trigger, ramp, ...
selected by writing Reg 06h[7:5] = 6
c. Triggered 1-Way sweep Mode -
INITIAL trigger, ramp, wait for trigger, hop back to initial frequency, wait for trigger, ramp, ...
selected by writing Reg 06h[7:5] = 5
Applications include test instrumentation, FMCW sensors, automotive radars and others.
The parameters of the sweep function are illustrated in Figure 31. The HMC703LP4E generates a sweep by
implementing miniature frequency steps in time. A smooth and continuous sweep is then generated, at the output of
the VCO, after the stepped signal is filtered by the loop filter, as shown in Figure 31. The stepped sweep approach
enables the HMC703LP4E to be in lock for entire duration of the sweep. This gives the HMC703LP4E a number of
advantages over conventional methods including:
The ability to generate a linear sweep.
The ability to have phase coherence between different ramps, so that the phase profile of each sweep is identical.
The ability to generate sweeps with identical phase and phase noise performance.
The ability to generate user defined sweeps in single-step ramp mode.
相关PDF资料
PDF描述
HMC704LP4E IC FRACT-N PLL 16BIT 24QFN
HMC830LP6GE IC FRACT-N PLL W/VCO 40QFN
HMP8117CNZ IC VIDEO DECODER NTSC/PAL 80PQFP
HMP8156ACNZ IC VIDEO ENCODER NTSC/PAL 64MQFP
HSP45102SC-40Z IC OSC NCO 40MHZ 28-SOIC
相关代理商/技术参数
参数描述
HMC703LP4ETR 制造商:Hittite Microwave Corp 功能描述:IC FRACT-N PLL W/SWEEPR 24QFN 制造商:Hittite Microwave Corp 功能描述:8 GHz Fractional-N PLL with Sweeper
HMC7043LP7FE 功能描述:IC FRACT-N PLL W/SWEEPR 48LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:新产品 类型:* PLL:是 输入:时钟 输出:CML,LVDS,LVPECL 电路数:1 比率 - 输入:输出:1:14 差分 - 输入:输出:是/是 频率 - 最大值:3.2GHz 分频器/倍频器:是/无 电压 - 电源:3.135 V ~ 3.465 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘,CSP 供应商器件封装:48-LFCSP(7x7) 标准包装:1
HMC7043LP7FETR 功能描述:IC FRACT-N PLL W/SWEEPR 48LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:在售 类型:时钟缓冲器 PLL:是 输入:时钟 输出:CMOS,LVDS,LVPECL 电路数:1 比率 - 输入:输出:1:14 差分 - 输入:输出:是/是 频率 - 最大值:3.2GHz 分频器/倍频器:是/无 电压 - 电源:3.135 V ~ 3.465 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘,CSP 供应商器件封装:48-LFCSP(7x7) 标准包装:1
HMC7044LP10BETR 功能描述:IC JITTER ATTENUATOR 68LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:在售 类型:漂移衰减器 PLL:是 输入:CML,CMOS,LVDS,LVPECL 输出:CML,LVDS,LVPECL 电路数:1 比率 - 输入:输出:4:14 差分 - 输入:输出:是/是 频率 - 最大值:3.2GHz 分频器/倍频器:是/无 电压 - 电源:3.135 V ~ 3.465 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:68-VFQFN 裸露焊盘,CSP 供应商器件封装:68-LFCSP-VQ(10x10) 标准包装:1
HMC704LP4E 功能描述:IC FRACT-N PLL 16BIT 24QFN RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器,PLL,频率合成器 系列:- 标准包装:2,000 系列:- 类型:PLL 频率合成器 PLL:是 输入:晶体 输出:时钟 电路数:1 比率 - 输入:输出:1:1 差分 - 输入:输出:无/无 频率 - 最大:1GHz 除法器/乘法器:是/无 电源电压:4.5 V ~ 5.5 V 工作温度:-20°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-LSSOP(0.175",4.40mm 宽) 供应商设备封装:16-SSOP 包装:带卷 (TR) 其它名称:NJW1504V-TE1-NDNJW1504V-TE1TR