参数资料
型号: HMC703LP4E
厂商: Hittite Microwave Corporation
文件页数: 20/58页
文件大小: 0K
描述: IC FRACT-N PLL W/SWEEPR 24QFN
标准包装: 1
类型: 整数 N/小数 N 分频
PLL:
输入: CMOS
输出: CMOS
电路数: 1
比率 - 输入:输出: 1:1
差分 - 输入:输出: 是/无
频率 - 最大: 8GHz
除法器/乘法器: 是/无
电源电压: 3.3V,5V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 24-VQFN 裸露焊盘
供应商设备封装: 24-QFN 裸露焊盘(4x4)
包装: 标准包装
其它名称: 1127-1065-6
P
LL
s
-
s
M
T
6 - 27
HMC703LP4E
v02.0813
8 GHz fractional syntHesizer
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 978-250-3373 fax Order On-line at www.hittite.com
Application Support: pll@hittite.com
1-Way sweeps
The HMC703LP4E can be configured to operate in Triggered 1-Way sweep mode by programming Reg 06h [7:5] =
6. Triggered 1-way sweeps are shown in Figure 33. Unlike 2-Way sweeps, Triggered 1-Way sweeps force the VCO to
hop back to the start frequency upon the next trigger. Triggered 1-Way sweeps also require a 3rd trigger to start the
new sweep. The 3rd trigger should be timed appropriately to allow the VCO to settle after the large frequency hop back
to the start frequency. subsequent odd numbered triggers will start the 1-Way sweep and repeat the process. 1-way
sweep can be triggered by external TRIG pin-6 if EXTTRIG_EN = 1, or the sPI_TRIG (Reg 0Eh).
Figure 33. 1-Way Sweep Control
single step ramp Mode
With any of the sweeper profiles, the HMC703LP4E can be configured to operate in single step mode. This causes
it to wait for an explicit trigger before every change in the frequency setpoint. A single step 1-Way Ramp is shown in
Figure 34. In this mode, a trigger is required for each step of the ramp. similar to autosweep, the ramp_busy flag will
go high on the first trigger, and will stay high until the nth trigger. The n+1 trigger will cause the ramp to jump to the start
frequency in 1-way ramp mode. The n+2 trigger will restart the 1-way ramp. single step ramp mode can be triggered
by external TRIG pin-6 if EXTTRIG_EN = 1, or the sPI_TRIG (Reg 0Eh).
In single-step mode (Reg 06h[23] = 1), the HMC703LP4E has the capability to generate arbitrarily shaped profiles
defined by the timing density of the trigger pulses. On each trigger event the frequency is stepped by the step value
programmed in Reg 0Ah. In addition, the HMC703LP4E allows the flexibility to change the step size (Reg 0Ah) during
the ramp, between steps, adding another degree of freedom to ramp profile generation. Note that the maximum trigger
rate where operation can be guaranteed is fPD/5. In addition, the step register (Reg 0Ah) should not be updated via
the sPI during the first two reference clock cycles after the trigger. The discrete nature of the frequency updates is
smoothed by the loop filter, and should not pose a problem provided that update rate is > 10 x the loop bandwidth.
相关PDF资料
PDF描述
HMC704LP4E IC FRACT-N PLL 16BIT 24QFN
HMC830LP6GE IC FRACT-N PLL W/VCO 40QFN
HMP8117CNZ IC VIDEO DECODER NTSC/PAL 80PQFP
HMP8156ACNZ IC VIDEO ENCODER NTSC/PAL 64MQFP
HSP45102SC-40Z IC OSC NCO 40MHZ 28-SOIC
相关代理商/技术参数
参数描述
HMC703LP4ETR 制造商:Hittite Microwave Corp 功能描述:IC FRACT-N PLL W/SWEEPR 24QFN 制造商:Hittite Microwave Corp 功能描述:8 GHz Fractional-N PLL with Sweeper
HMC7043LP7FE 功能描述:IC FRACT-N PLL W/SWEEPR 48LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:新产品 类型:* PLL:是 输入:时钟 输出:CML,LVDS,LVPECL 电路数:1 比率 - 输入:输出:1:14 差分 - 输入:输出:是/是 频率 - 最大值:3.2GHz 分频器/倍频器:是/无 电压 - 电源:3.135 V ~ 3.465 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘,CSP 供应商器件封装:48-LFCSP(7x7) 标准包装:1
HMC7043LP7FETR 功能描述:IC FRACT-N PLL W/SWEEPR 48LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:在售 类型:时钟缓冲器 PLL:是 输入:时钟 输出:CMOS,LVDS,LVPECL 电路数:1 比率 - 输入:输出:1:14 差分 - 输入:输出:是/是 频率 - 最大值:3.2GHz 分频器/倍频器:是/无 电压 - 电源:3.135 V ~ 3.465 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘,CSP 供应商器件封装:48-LFCSP(7x7) 标准包装:1
HMC7044LP10BETR 功能描述:IC JITTER ATTENUATOR 68LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:在售 类型:漂移衰减器 PLL:是 输入:CML,CMOS,LVDS,LVPECL 输出:CML,LVDS,LVPECL 电路数:1 比率 - 输入:输出:4:14 差分 - 输入:输出:是/是 频率 - 最大值:3.2GHz 分频器/倍频器:是/无 电压 - 电源:3.135 V ~ 3.465 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:68-VFQFN 裸露焊盘,CSP 供应商器件封装:68-LFCSP-VQ(10x10) 标准包装:1
HMC704LP4E 功能描述:IC FRACT-N PLL 16BIT 24QFN RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器,PLL,频率合成器 系列:- 标准包装:2,000 系列:- 类型:PLL 频率合成器 PLL:是 输入:晶体 输出:时钟 电路数:1 比率 - 输入:输出:1:1 差分 - 输入:输出:无/无 频率 - 最大:1GHz 除法器/乘法器:是/无 电源电压:4.5 V ~ 5.5 V 工作温度:-20°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-LSSOP(0.175",4.40mm 宽) 供应商设备封装:16-SSOP 包装:带卷 (TR) 其它名称:NJW1504V-TE1-NDNJW1504V-TE1TR