参数资料
型号: ISP1160BD/01,118
厂商: ST-ERICSSON
元件分类: 总线控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封装: 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件页数: 16/88页
文件大小: 394K
代理商: ISP1160BD/01,118
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 05 — 24 December 2004
23 of 88
9397 750 13963
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
ATL buffer length
= 400H, ITL buffer length = 200H.
This is insufcient use of the internal FIFO buffer RAM.
ATL buffer length
= 1000H, ITL buffer length = 0H.
This will use the internal FIFO buffer RAM for only ATL transfers.
The actual requirement for the buffer RAM needs to reach not the maximum size. You
can make your selection based on your application.
The following are some calculations of the ISO_A or ISO_B space for a frame of data:
Maximum number of useful data sent during one USB frame is 1280 bytes (20 ISO
packets of 64 bytes). The total RAM size needed is:
20
× 8 + 1280 = 1440 bytes.
Maximum number of packets for different endpoints sent during one USB frame is
150 (150 ISO packets of 1 byte). The total RAM size needed is:
150
× 8 + 150 × 1 = 1350 bytes.
The Ping buffer RAM (ITL0) and the Pong buffer RAM (ITL1) have a maximum size
of 2 kbytes each. All data needed for one frame can be stored in the Ping or the
Pong buffer RAM.
When the embedded system wants to initiate a transfer to the USB bus, the data
needed for one frame is transferred to the ATL buffer or the ITL buffer. The
microprocessor detects the buffer status through interrupt routines. When the
HcBufferStatus register (2CH to read only) indicates that the buffer is empty, then the
microprocessor writes data into the buffer. When the HcBufferStatus register
indicates that the buffer is full, the data is ready on the buffer, and the microprocessor
needs to read data from the buffer.
For every 1 ms, there might be many events to generate interrupt requests to the
microprocessor for data transfer or status retrieval. However, each of the interrupt
types dened in this specication can be enabled or disabled by setting
Hc
PInterruptEnable register bits accordingly.
Fig 17. HC internal FIFO buffer RAM partitions.
MGT950
not used
ATL buffer
ITL0
top
bottom
ITL1
ISO_A
FIFO buffer RAM
ISO_B
control/bulk/interrupt
data
programmable
sizes
4 kbytes
ITL buffer
ATL
相关PDF资料
PDF描述
ISP1160BD/01,151 UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
ISP1161A1BM,557 UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
ISP1181BBS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BBS,518 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BDGG,112 UNIVERSAL SERIAL BUS CONTROLLER, PDSO48
相关代理商/技术参数
参数描述
ISP1160BD01FA 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
ISP1160BD01-S 功能描述:USB 接口集成电路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
ISP1160BD01-T 功能描述:USB 接口集成电路 USB HOST CTRL FULL-SPD RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
ISP1160BD01TM 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
ISP1160BM 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller