参数资料
型号: MC68302CRC16C
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, CPGA132
封装: PGA-132
文件页数: 110/128页
文件大小: 641K
代理商: MC68302CRC16C
Applications
MOTOROLA
MC68EN302 REFERENCE MANUAL
6-3
AR_CNTRL = $7000
HASH_EN = 0 (all 64 entries used for “match” mode)
INDEX_EN = 1 (enables hardware to write “Reason” and “ARIndex” fields into the
receive BD.
MULT1–MULT0 = 11 (reject multicast and broadcast frames).
Place the frame to be looped internally into memory. Entire frame should be in a single
buffer. Allocate receive buffer memory to receive same frame plus 4 CRC bytes.
Initialize CAM (arbitrarily select 1 of 64 entries to contain the DA of the frame to be
transmitted). CAM is in perfect match mode. CAM starts at MOBA + $A00.
Write $FF_FF_FF into all CAM entries except 1
Write DA of transmit frame into remaining entry
Initialize buffer descriptors. A good practice would be to initialize all locations to $0000
before putting in any specific values.
MOBA + C48 = $0000 (clear E bit in second receive BD)
MOBA + C46 = $LLLL (A15–A0 pointer to receive buffer)
MOBA + C44 = $00HH (A23–A16 pointer to receive buffer)
MOBA + C40 = $8000 (set E bit in first receive BD)
MOBA + C08 = $0000 (clear R bit in second transmit BD)
MOBA + C06 = $LLLL (A15–A0 pointer to transmit buffer)
MOBA + C04 = $00HH (A23–A16 pointer to transmit buffer)
MOBA + C02 = $0NNN (transmit buffer length)
MOBA + C00 = $8C00 (single buffer frame, hardware appends CRC)
ECNTRL = $0003 (assert ETHER_EN to the Ethernet Controller, this will cause the
buffer descriptor and DMA state machines to start operation)
Frame loopback should occur under hardware control. The TFINT and RFINT interrupts
should occur. Once these interrupts have occurred, frame loopback can be verified by
the following:
— Receive buffer should contain frame transmitted plus 4 byte CRC
— Transmit buffer descriptor should contain the following:
MOBA + C00 = 0C00
MOBA + C02, C04, C06 locations should be unchanged
— Receive buffer descriptor should contain the following:
MOBA + C40 = $0C00
MOBA + C42 = value in (MOBA + C02) + 4
MOBA + C44, C46 locations should be unchanged
6.2 MOVING A QUICC ETHERNET DRIVER TO A 68EN302 ETHERNET
DRIVER
Porting an Ethernet driver written for the MC68360 QUICC to the MC68EN302 requires only
that the QUICC driver be pared down to support a simpler implementation of Ethernet. In
the case of register settings and counters, many of the functions requiring user initialization
by the QUICC are either supported directly in the MC68EN302 hardware as dictated by the
Ethernet standard, or are provided in the indications that accompany the buffer descriptors.
This simplifies the initialization routines in the area of CRC calculation as well as the
maximum and minimum frame lengths, DMA operations and the backoff counter
相关PDF资料
PDF描述
MC9S12DJ256CVFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MC68HC705C5CP 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDIP40
M37471M8-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37478M4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37478M8-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP56
相关代理商/技术参数
参数描述
MC68302CRC20 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Integrated Multiprotocol Processor User’s Manual
MC68302CRC20C 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC68302EH16C 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC68302EH16C 制造商:Freescale Semiconductor 功能描述:32-Bit Microcontroller IC
MC68302EH16CB1 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324