参数资料
型号: MC68302CRC16C
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, CPGA132
封装: PGA-132
文件页数: 50/128页
文件大小: 641K
代理商: MC68302CRC16C
MC68EN302 Module Bus Controller
MOTOROLA
MC68EN302 REFERENCE MANUAL
2-11
Byte (BB) bit is provided in the MBC register. This bit reflects the state of A0 during the last
bus error caused by an access to a byte peripheral.
2.9.3 Retry Handling
In most cases, an MC68EN302 retry is identical to 302 retry operation. If however, a retry
occurs during the second bus cycle of a word access to an 8-bit port, the retry signal is
passed to the initiating master. This causes both of the cycles to be retried, instead of just
the second cycle.
2.10 PARITY LOGIC
The MC68EN302 provides parity support to generate, check, and report parity and parity
errors.
2.10.1 Parity Generation
The MC68EN302 provides the option of generating and checking parity for the 4 chip selects
and the 2 DRAM banks. In the case of a write, parity is generated with one bit of parity per
byte of data. The parity is output on the parity pins and delayed from other data by the
propagation delay through the parity generator.
2.10.2 Parity Checking
Parity checking is performed on read accesses. If the 8-bit option of the Chip Select logic is
used, parity is checked on only the upper 8-bits. In all other options, parity is checked on
both bytes.
2.10.3 Parity Error Reporting
Parity error reporting is accomplished via three mechanisms.
Parity Error Pin
This pin is asserted when a parity error is detected. Parity error detection does not occur
with enough time to generate a bus error on the affected cycle. The parity error pin may be
used with external circuitry to facilitate parity error handling. This pin is not negated until all
the parity error register bits are cleared.
Parity Error Status Bits
There are 6 PCSR register bits dedicated to providing status on parity errors, corresponding
to the 2 DRAM banks and the 4 Chip Selects. If a parity error is detected, the bit that
corresponds to the module that generated the error is set. These bits are reset to zero and
are cleared by writing a one.
Parity Error Interrupt
The PIE bit in the PCSR register is provided to allow the option of generating a level 5 (or 3)
interrupt in the event that a parity error is generated. If this option is selected, the interrupt
is driven after the error is detected until the Parity Error Status Bits are cleared.
相关PDF资料
PDF描述
MC9S12DJ256CVFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MC68HC705C5CP 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDIP40
M37471M8-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37478M4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37478M8-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP56
相关代理商/技术参数
参数描述
MC68302CRC20 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Integrated Multiprotocol Processor User’s Manual
MC68302CRC20C 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC68302EH16C 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC68302EH16C 制造商:Freescale Semiconductor 功能描述:32-Bit Microcontroller IC
MC68302EH16CB1 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324