参数资料
型号: MC68302CRC16C
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, CPGA132
封装: PGA-132
文件页数: 81/128页
文件大小: 641K
代理商: MC68302CRC16C
ETHERNET Controller
MOTOROLA
MC68EN302 REFERENCE MANUAL
4-17
W—Wrap (Final BD in Table), written by user.
0 = This is not the last buffer descriptor in the Tx BD table.
1 = This is the last buffer descriptor in the Tx BD table. After this buffer has been used,
the Ethernet controller transmits data from the first BD in the table. The maximum
number of Tx BDs in this table is programmable through the BDSIZE bits.
I—Interrupt, written by user.
0 = No interrupt is generated after this buffer has been serviced.
1 = TBINT is set in the Ethernet event register after this buffer has been serviced. If
enabled through the mask register, this bit can cause interrupts to the host.
L—Last in Frame, written by user.
0 = The buffer is not the last in the transmit frame.
1 = The buffer is the last in the transmit frame.
TC—Tx CRC, written by user (only valid if L = 1).
0 = End transmission immediately after the last data byte.
1 = Transmit the CRC sequence after the last data byte.
DEF—Defer Indication, written by Ethernet controller (only valid if L = 1).
The Ethernet controller had to defer while attempting frame transmission. DEF is not set if
a collision occurs during transmission.
HB—Heartbeat Error, written by Ethernet controller (only valid if L = 1).
The collision input was not asserted within the heartbeat window after transmit completion.
HB may be set only if HBC is not set in the ECNFIG register.
LC—Late Collision, written by Ethernet controller (only valid if L = 1).
A collision has occurred after 56 data bytes have been transmitted. The Ethernet controller
terminates the transmission.
RL—Retransmission Limit, written by Ethernet controller (only valid if L = 1).
The transmitter has failed (Retry Limit + 1) attempts to successfully transmit a message due
to repeated collisions on the medium.
RC—Retry Count, written by Ethernet controller (only valid if L = 1).
These four bits indicate the number of retries required before this frame was successfully
transmitted. If RC = 0, then the frame was transmitted correctly the first time. If RC = 15,
then the frame was transmitted successfully while the retry count was at its maximum value.
If RL is set, then RC has no meaning.
UN—Underrun, written by Ethernet controller (only valid if L = 1).
A transmit FIFO underrun occurred while transmitting one or more of the the data buffers
associated with this frame. When FIFO underrun occurs, frame transmission halts once an
incorrect CRC is appended. The remaining buffer(s) associated with this frame are DMA’d
and dumped by the transmit logic.
相关PDF资料
PDF描述
MC9S12DJ256CVFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MC68HC705C5CP 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDIP40
M37471M8-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37478M4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37478M8-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP56
相关代理商/技术参数
参数描述
MC68302CRC20 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Integrated Multiprotocol Processor User’s Manual
MC68302CRC20C 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC68302EH16C 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC68302EH16C 制造商:Freescale Semiconductor 功能描述:32-Bit Microcontroller IC
MC68302EH16CB1 功能描述:微处理器 - MPU 68K INTGR COM PROC DMA RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324