参数资料
| 型号： | NCN6000DTBR2G |
| 厂商： | ON Semiconductor |
| 文件页数： | 32/36页 |
| 文件大小： | 0K |
| 描述： | IC INTERFACE SMART CARD 20TSSOP |
| 产品变化通告： | Product Obsolescence 01/Jul/2009 |
| 标准包装： | 1 |
| 应用： | ATM 终端，气泵，ISM |
| 接口： | 微控制器 |
| 电源电压： | 2.7 V ~ 6 V |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 剪切带 (CT) |
| 安装类型： | 表面贴装 |
| 其它名称： | NCN6000DTBR2GOSCT |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页当前第32页第33页第34页第35页第36页
NCN6000
http://onsemi.com
5
The programming can be achieved with the card powered
ON or OFF. The identification of the interrupt is carried out
by polling the STATUS pin, the Vbat voltage and the
DCDC results being provided on the same pin as depicted
by the table in Figure 4. During the programming mode, the
PGM pin can be released to High since the mode is internally
latched by the Negative going transition presents on the Chip
Select pin.
PGM
INT
CRD_DET
CARD EXTRACTED
CARD IDENTIFICATION
POLLING
50
ms
INTERRUPT
ACKNOWLEDGE
50
ms
High
Low
CS
A0
A1
STATUS
S1 CLEAR INTERRUPT
S2 CARD PRESENT: STATUS = 1
S3 CLEAR INTERRUPT
S4 CARD PRESENT: STATUS = 0
Figure 5. Interrupt Servicing and Card Polling
When a card is either inserted or extracted, the CRD_DET
pin signal is debounced internally prior to pull the INT pin
to
Low.
The
builtin
logic
circuit
automatically
accommodates positive or negative input signal slope, on
both insertion and extraction state, depending upon the
polarity defined during the initialization sequence. The
default condition is Normally Open switch, negative going
card detection. The external CPU shall acknowledge the
request by forcing CS = L which, in turn, releases the INT
pin to High upon positive going of Chip Select (Table 4).
Polling the STATUS pin as depicted in Table 3 identifies the
active card. If a card is present, the STATUS returns High,
otherwise a Low is presented pin 5. The 50
ms digital filter
is activated during both Insertion and Extraction of the card.
The MPU shall clear the INT line when the card has been
extracted, making the interrupt function available for other
purposes. However, neither the NCN6000 operation nor the
smart card I/O line or commands are affected by the state of
the INT pin.
On the other hand, clearing the INT and reading the
STATUS register can be performed by a single read by the
MPU: states S1 and S2 can be combined in a single
instruction, the same for S3 and S4.
相关PDF资料 |
PDF描述 |
|---|---|
| NCN6001DTBR2 | IC INTERFACE SMART CARD 20TSSOP |
| NCN6004AFTBR2G | IC INTERFACE SAM/SIM DUAL 48TQFP |
| NCN6804MNR2G | IC SMART CARD DUAL W/SPI 32-QFN |
| NCN7200MTTWG | IC MUX/DEMUX OCTAL 1X2 42WQFN |
| NCN8024DTBR2G | SMART CARD IC 5V/3V TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCN6001 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Smartcard Interface ICs |
| NCN6001/D | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Compact Smart Card Interface IC |
| NCN6001_06 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Compact Smart Card Interface IC |
| NCN6001_0610 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Smartcard Interface ICs |
| NCN6001DTBEVB | 功能描述:界面开发工具 NCN6001 TSSOP EVAL BOARD RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
发布紧急采购，3分钟左右您将得到回复。