参数资料
型号: P89LPC954FBD44,151
厂商: NXP Semiconductors
文件页数: 27/69页
文件大小: 0K
描述: IC 80C51 MCU FLASH 16K 44LQFP
标准包装: 160
系列: LPC900
核心处理器: 8051
芯体尺寸: 8-位
速度: 18MHz
连通性: I²C,SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 40
程序存储器容量: 16KB(16K x 8)
程序存储器类型: 闪存
RAM 容量: 512 x 8
电压 - 电源 (Vcc/Vdd): 2.4 V ~ 3.6 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 44-LQFP
包装: 托盘
配用: 568-1759-ND - EMULATOR DEBUGGER/PROGRMMR LPC9X
其它名称: 568-7917
568-7917-ND
568-8269
935284303151
P89LPC954FBD44,151-ND
P89LPC954FBD44-S
P89LPC954FBD44-S-ND
P89LPC952_954_4
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 04 — 24 July 2008
33 of 69
NXP Semiconductors
P89LPC952/954
8-bit microcontroller with 10-bit ADC
7.16.1 Reset vector
Following reset, the P89LPC952/954 will fetch instructions from either address 0000H or
the Boot address. The Boot address is formed by using the boot vector as the high byte of
the address and the low byte of the address = 00H.
The Boot address will be used if a UART break reset occurs, or the non-volatile Boot
Status bit (BOOTSTAT.0) = 1, or the device is forced into ISP mode during power-on (see
P89LPC952/954
User’s Manual). Otherwise, instructions will be fetched from address
0000H.
7.17 Timers/counters 0 and 1
The P89LPC952/954 has two general purpose counter/timers which are upward
compatible with the standard 80C51 Timer 0 and Timer 1. Both can be congured to
operate either as timers or event counters. An option to automatically toggle the T0 and/or
T1 pins upon timer overow has been added.
In the ‘Timer’ function, the register is incremented every machine cycle.
In the ‘Counter’ function, the register is incremented in response to a 1-to-0 transition at its
corresponding external input pin, T0 or T1. In this function, the external input is sampled
once during every machine cycle.
Timer 0 and Timer 1 have ve operating modes (Modes 0, 1, 2, 3 and 6). Modes 0, 1, 2
and 6 are the same for both Timers/Counters. Mode 3 is different.
7.17.1 Mode 0
Putting either Timer into Mode 0 makes it look like an 8048 Timer, which is an 8-bit
Counter with a divide-by-32 prescaler. In this mode, the Timer register is congured as a
13-bit register. Mode 0 operation is the same for Timer 0 and Timer 1.
7.17.2 Mode 1
Mode 1 is the same as Mode 0, except that all 16 bits of the timer register are used.
7.17.3 Mode 2
Mode 2 congures the Timer register as an 8-bit Counter with automatic reload. Mode 2
operation is the same for Timer 0 and Timer 1.
7.17.4 Mode 3
When Timer 1 is in Mode 3 it is stopped. Timer 0 in Mode 3 forms two separate 8-bit
counters and is provided for applications that require an extra 8-bit timer. When Timer 1 is
in Mode 3 it can still be used by the serial port as a baud rate generator.
7.17.5 Mode 6
In this mode, the corresponding timer can be changed to a PWM with a full period of
256 timer clocks.
相关PDF资料
PDF描述
P89LPC972FN,129 MCU 80C51 8KB FLASH 20DIP
P89LPC985FDH,529 IC 80C51 MCU KB FLASH 28TSSOP
P89V51RC2FA,512 IC 80C51 MCU FLASH 32K 44-PLCC
P89V52X2FN,112 IC 80C51 MCU FLASH 8K 40-DIP
P89V662FA,512 IC 80C51 MCU FLASH 32K 44-PLCC
相关代理商/技术参数
参数描述
P89LPC954FBD44-S 功能描述:8位微控制器 -MCU 16K FL/1K RAM/512B EE/10B ADC RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
P89LPC954FBD48 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontroller with accelerated two-clock 80C51 core 8 kB/16 kB 3 V byte-erasable flash with 10-bit ADC
P89LPC954FBD48,151 功能描述:8位微控制器 -MCU 8B MCU 2-CLOCK 80C51 8/16KB 3V 10B RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
P89LPC970 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash
P89LPC970FDH 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash