- 您现在的位置：买卖IC网 > PDF目录98147 > STE10/100E (STMICROELECTRONICS) 1 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP128 PDF资料下载
参数资料
| 型号： | STE10/100E |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 1 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP128 |
| 封装： | 14 X 20 MM, 2.70 MM HEIGHT, PLASTIC, QFP-128 |
| 文件页数： | 46/66页 |
| 文件大小： | 396K |
| 代理商： | STE10/100E |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页当前第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页
STE10/100A
50/66
6.5.2 Transceiver Operation
The transceiver portion of the STE10/100A integrates the IEEE802.3u compliant functions of PCS (physical
coding sub-layer), PMA (physical medium attachment) sub-layer, and PMD (physical medium dependent) sub-
layer for 100BASE-TX, and the IEEE802.3 compliant functions of Manchester encoding/decoding and trans-
ceiver for 10BASE-T. All the functions and operating schemes are described in the following sections.
s
100BASE-TX Transmit Operation
For 100BASE-TX transmissions, the STE10/100A transceiver provides the transmission functions of
PCS, PMA, and PMD for encoding of MII data nibbles into five-bit code-groups (4B/5B), scrambling,
serialization of scrambled code-groups, converting the serial NRZ code into NRZI code, converting the
NRZI code into MLT3 code, and then driving the MLT3 code into the category 5 Unshielded Twisted
Pair cable through an isolation transformer with the turns ratio of 1: 1.
s
Recommended Transformers: HB626-1 from Transpower Technologies, 9410 Prototype Drive, Suite
#1, Reno, NV 89511. Tel: (775) 852-0140 and H1102 from Pulse Engineering Inc., 12220 World Trade
Drive, San Diego, CA92128. Tel: (619) 674-8100.
s
Data code-groups Encoder: In normal MII mode applications, the transceiver receives nibble type 4B
data via the TxD0~3 inputs of the MII. These inputs are sampled by the transceiver on the rising edge
of Tx-clk and passed to the 4B/5B encoder to generate the 5B code-group used by 100BASE-TX.
s
Idle code-groups: In order to establish and maintain the clock synchronization, the transceiver must
keep transmitting signals to medium. The transceiver will generate Idle code-groups for transmission
when there is no actual data to be sent by MAC.
s
Start-of-Stream Delimiter-SSD (/J/K/): In a transmission stream, the first 16 nibbles comprise the
MAC preamble. In order to let a network partner delineate the boundary of a data transmission
sequence and to authenticate carrier events, the transceiver will replace the first 2 nibbles of the MAC
preamble with /J/K/ code-groups.
s
End-of-Stream Delimiter-ESD (/T/R/): In order to indicate the termination of normal data
transmissions, the transceiver will insert 2 nibbles of /T/R/ code-group after the last nibble of the FCS.
s
Scrambling: All the encoded data (including the idle, SSD, and ESD code-groups) is passed to the data
scrambler to reduce EMI by spreading the power spectrum using a 10-bit scrambler seed loaded at the
beginning.
s
Data conversion of Parallel to Serial, NRZ to NRZI, NRZI to MLT3: After being scrambled, the 5B
type transmission data at 25MHz will be converted to a 125HMz serial bit stream by the parallel-to-serial
function. The bit stream will be further converted from NRZ to NRZI format, unless the conversion
function is bypassed by clearing ENRZI (bit 7 of XR10) to 0. After NRZI conversion, the NRZI bit stream
is passed through MLT3 encoder to generate the TP-PMD specified MLT3 code. By using MLT3 code,
the frequency and energy content of the transmission signal is reduced in the UTP, making the system
more easily compliant to FCC EMI specifications.
s
Wave-Shaper and Media Signal Driver: In order to reduce the energy of the harmonic frequency of
transmission signals, the transceiver provides a wave-shaper prior the line driver to smooth the rising/
falling edge of transmission signals while maintaining the waveforms’ symmetry. The 100BASE-TX and
10BASE-T wave-shaped signals are both passed to the same media signal driver. This can simplify
system design by employing a single external magnetic connection.
s
100BASE-TX Receiving Operation
For 100BASE-TX receiving operation, the transceiver provides the receiving functions of PMD, PMA,
and PCS for incoming data signals through category 5 UTP cable and an isolation transformer with a
1:1 turns ratio. The receive transceiver portion includes the adaptive equalizer and baseline wander,
MLT3 to NRZI data conversion, NRZI to NRZ conversion, serial to parallel conversion, a PLL for clock
and data recovery, de-scrambler, and the 5B/4B decoder.
s
Adaptive Equalizer and Baseline Wander: High speed signals over unshielded (or shielded) twisted
相关PDF资料 |
PDF描述 |
|---|---|
| STEL-1173/CM | 8-BIT, DSP-NUM CONTROLLED OSCILLATOR, PQCC44 |
| STEL-1375A+80 | SPECIALTY MICROPROCESSOR CIRCUIT, DIP35 |
| STEL-1376 | SPECIALTY MICROPROCESSOR CIRCUIT, DIP65 |
| STEL-1377Q | SPECIALTY MICROPROCESSOR CIRCUIT, DIP63 |
| STK1390-5S25I | 0 TIMER(S), REAL TIME CLOCK, PDSO32 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| STE101P | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:10/100 Fast ethernet 3.3V transceiver |
| STE-1042609RFRC | 功能描述:MAGNET ROUND AXIAL CHASSIS MNT 制造商:steute wireless 系列:- 零件状态:在售 形状:圆形 磁化:轴向 材料:- 表面:- 等级:- 高斯强度:- 尺寸:0.886" 直径 x 0.335" 高（22.50mm x 8.50mm） 工作温度:- 标准包装:1 |
| STE10A | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:PCI 10/100 Ethernet controller with integrated PHY (3.3V) |
| STE10-BOARD | 功能描述:以太网开发工具 Eval Board for STE10 RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压: |
| STE110NA20 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR |
发布紧急采购，3分钟左右您将得到回复。