
xr
XRT94L33
3-CHANNEL DS3/E3/STS-1 TO STS-3/STM-1 MAPPER IC DATA SHEET
Rev.1.2.0.
77
A20
STS1RXD_PL_0
RXIDLE_0
RXLCD_0
O
CMOS
STS-1 Receive (Drop) Telecom Bus – Payload Indicator
Output Signal – Channel 0:
The exact function of this output pin depends upon whether
the user has enabled or disabled the “STS-1 Telecom Bus
Interface block” associated with Channel 0.
If the STS-1 Telecom Bus Interface (associated with
Channel 0) is enabled – STS-1/STS-1 Receive (Drop)
Telecom Bus – Payload Indicator Output – STS1RXD_PL_0:
This output pin indicates whether or not Transport Overhead
bytes are being output via the “STS1RXD_D_0[7:0]” output
pins.
This output pin is pulled “low” for the duration that the STS-1
Receive Telecom Bus is transmitting a Transport Overhead
byte via the “STS1RXD_D_0[7:0]” output pins.
Conversely, this output pin is pulled “high” for the duration that
the STS-1 Receive Telecom Bus is transmitting something
other
than
a
Transport
Overhead
byte
via
the
“STS1RXD_D_0[7:0]” output pins.
RXIDLE_0 (Receive HDLC block idle indicator – Channel
0)
RXLCD_0
(Receive
Cell
Processor
Loss
of
Cell
Delineation – Channel 0)
D26
STS1RXD_PL_1
RXIDLE_1
RXLCD_1
O
CMOS
STS-1 Receive (Drop) Telecom Bus – Payload Indicator
Output Signal – Channel 1:
The exact function of this output pin depends upon whether
the user has enabled or disabled the “STS-1 Telecom Bus
Interface block” associated with Channel 1.
If the STS-1 Telecom Bus Interface (associated with
Channel 1) is enabled – STS-1/STS-1 Receive (Drop)
Telecom Bus – Payload Indicator Output – STS1RXD_PL_1:
This output pin indicates whether or not Transport Overhead
bytes are being output via the “STS1RXD_D_1[7:0]” output
pins.
This output pin is pulled “low” for the duration that the STS-1
Receive Telecom Bus is transmitting a Transport Overhead
byte via the “STS1RXD_D_1[7:0]” output pins.
Conversely, this output pin is pulled “high” for the duration that
the STS-1 Receive Telecom Bus is transmitting something
other
than
a
Transport
Overhead
byte
via
the
“STS1RXD_D_1[7:0]” output pins.
RXIDLE_1 (Receive HDLC block idle indicator – Channel
1)
RXLCD_1
(Receive
Cell
Processor
Loss
of
Cell
Delineation – Channel 1)