参数资料
型号: AD9852ASVZ
厂商: Analog Devices Inc
文件页数: 21/52页
文件大小: 0K
描述: IC DDS SYNTHESIZER CMOS 80-TQFP
产品培训模块: Direct Digital Synthesis Tutorial Series (1 of 7): Introduction
Direct Digital Synthesizer Tutorial Series (7 of 7): DDS in Action
Direct Digital Synthesis Tutorial Series (3 of 7): Angle to Amplitude Converter
Direct Digital Synthesis Tutorial Series (6 of 7): SINC Envelope Correction
Direct Digital Synthesis Tutorial Series (4 of 7): Digital-to-Analog Converter
Direct Digital Synthesis Tutorial Series (2 of 7): The Accumulator
标准包装: 1
分辨率(位): 12 b
主 fclk: 300MHz
调节字宽(位): 48 b
电源电压: 3.14 V ~ 3.47 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 80-TQFP 裸露焊盘
供应商设备封装: 80-TQFP-EP(12x12)
包装: 托盘
配用: AD9852/PCBZ-ND - BOARD EVAL FOR AD9852
AD9852
Rev. E | Page 28 of 52
The two fixed elements of the transition time are the period of
the system clock (which drives the ramp rate counter) and the
number of amplitude steps (4096). For example, if the system
clock of the AD9852 is 100 MHz (10 ns period) and the ramp
rate counter is programmed for a minimum count of 3, two system
clock periods are required: one rising edge loads the countdown
value, and the next edge decrements the counter from 3 to 2. If the
countdown value is less than 3, the ramp rate counter stalls and
therefore produces a constant scaling value to the digital multiplier.
This stall condition may have an application for the user.
The relationship of the 8-bit countdown value to the time between
output pulses is given as
(N + 1) × System Clock Period
where N is the 8-bit countdown value.
A total of 4096 output pulses is required to advance the 12-bit
up-counter from zero scale to full scale. Therefore, the minimum
output shaped keying ramp time for a 100 MHz system clock is
4096 × 4 × 10 ns ≈ 164 μs
The maximum ramp time is
4096 × 256 × 10 ns ≈ 10.5 ms
Finally, by changing the logic state of Pin 30, output shaped
keying automatically performs the programmed output envelope
functions when OSK INT is high. A logic high on Pin 30 causes
the outputs to linearly ramp up to full-scale amplitude and hold
until the logic level is changed to low, causing the outputs to
ramp down to zero scale.
12-BIT DIGITAL
MULTIPLIER
12
(BYPASS MULTIPLIER)
OSK EN = 0
OSK EN = 1
OSK EN = 0
OSK EN = 1
12
DIGITAL
SIGNAL IN
USER-PROGRAMMABLE
12-BIT MULTIPLIER
OUTPUT SHAPED
KEYING MULTIPLIER
REGISTER
12
OSK INT = 1
OSK INT = 0
1
8-BIT RAMP
RATE
COUNTER
SYSTEM
CLOCK
ON/OFF OUTPUT SHAPED
KEYING PIN
12-BIT
UP/DOWN
COUNTER
DDS DIGITAL
OUTPUT
COSINE
DAC
00634-047
Figure 47. Block Diagram of the Digital Multiplier Section Responsible for the Output Shaped Keying Function
相关PDF资料
PDF描述
AD9854ASTZ IC DDS QUADRATURE CMOS 80-LQFP
AD9858BSVZ IC DDS DAC 10BIT 1GSPS 100-TQFP
AD9859YSVZ-REEL7 IC DDS DAC 10BIT 400MSPS 48TQFP
AD9880KSTZ-100 IC INTERFACE/HDMI 100MHZ 100LQFP
AD9882KSTZ-140 IC INTERFACE/DVI 100MHZ 100LQFP
相关代理商/技术参数
参数描述
AD9852ASVZ 制造商:Analog Devices 功能描述:IC DDS 300MHz TQFP-80 制造商:Analog Devices 功能描述:IC, DDS, 300MHz, TQFP-80
AD9852ASVZ1 制造商:AD 制造商全称:Analog Devices 功能描述:CMOS 300 MSPS Complete DDS
AD9852BSVZ 制造商:Analog Devices 功能描述:
AD9853 制造商:AD 制造商全称:Analog Devices 功能描述:Programmable Digital OPSK/16-QAM Modulator
AD9853-45PCB 制造商:AD 制造商全称:Analog Devices 功能描述:Programmable Digital OPSK/16-QAM Modulator