参数资料
型号: ADN2818ACPZ-RL7
厂商: Analog Devices Inc
文件页数: 14/40页
文件大小: 0K
描述: IC CLOCK/DATA RECOVERY 32-LFCSP
标准包装: 1,500
类型: 时钟和数据恢复(CDR),多路复用器
PLL:
主要目的: SONET/SDH
输入: CML
输出: CML
电路数: 1
比率 - 输入:输出: 1:2
差分 - 输入:输出: 是/是
频率 - 最大: 2.7GHz
电源电压: 3 V ~ 3.6 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘,CSP
供应商设备封装: 32-LFCSP-VQ(5x5)
包装: 带卷 (TR)
Data Sheet
ADN2817/ADN2818
Rev. E | Page 21 of 40
At medium jitter frequencies, the gain and tuning range of the
VCO are not large enough to track input jitter. In this case, the
VCO control voltage becomes large and saturates, and the VCO
frequency dwells at one extreme of its tuning range or the other.
The size of the VCO tuning range, therefore, has only a small
effect on the jitter accommodation. The delay-locked loop control
voltage is now larger, and so the phase shifter takes on the
burden of tracking the input jitter. The phase shifter range, in
UI, can be seen as a broad plateau on the jitter tolerance curve.
The phase shifter has a minimum range of 2 UI at all data rates.
The gain of the loop integrator is small for high jitter frequencies,
so that larger phase differences are needed to make the loop
control voltage big enough to tune the range of the phase shifter.
Large phase errors at high jitter frequencies cannot be tolerated.
In this region, the gain of the integrator determines the jitter
accommodation. Because the gain of the loop integrator declines
linearly with frequency, jitter accommodation is lower with higher
jitter frequency. At the highest frequencies, the loop gain is very
small, and little tuning of the phase shifter can be expected. In this
case, jitter accommodation is determined by the eye opening of the
input data, the static phase error, and the residual loop jitter
generation. The jitter accommodation is roughly 0.5 UI in this
region. The corner frequency between the declining slope and
the flat region is the closed-loop bandwidth of the delay-locked
loop, which is roughly 3 MHz at OC-48.
相关PDF资料
PDF描述
MS27472E24B35SA CONN RCPT 128POS WALL MNT W/SCKT
MS27468T25B19P CONN RCPT 19POS JAM NUT W/PINS
SY87701LZG IC CLOCK/DATA RECOVERY 28-SOIC
VI-21Z-MV-F2 CONVERTER MOD DC/DC 2V 60W
SY87721LHY TR IC CLOCK/DATA RECOVERY 64-TQFP
相关代理商/技术参数
参数描述
ADN2819 制造商:AD 制造商全称:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp
ADN2819ACP-CML 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP Tray 制造商:Rochester Electronics LLC 功能描述:MULTI-RATE 2.7GBPS CDR/ PA LOW POWER I.C - Bulk
ADN2819ACP-CML-RL 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP T/R
ADN2819ACPZ-CML 功能描述:IC CLOCK/DATA RECOVERY 48LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP (0.240",6.10mm 宽) 供应商设备封装:64-TSSOP 包装:管件
ADN2819ACPZ-CML1 制造商:AD 制造商全称:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp