- 您现在的位置：买卖IC网 > PDF目录9660 > ADN2818ACPZ-RL7 (Analog Devices Inc)IC CLOCK/DATA RECOVERY 32-LFCSP PDF资料下载
参数资料
| 型号： | ADN2818ACPZ-RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 15/40页 |
| 文件大小： | 0K |
| 描述： | IC CLOCK/DATA RECOVERY 32-LFCSP |
| 标准包装： | 1,500 |
| 类型： | 时钟和数据恢复（CDR），多路复用器 |
| PLL： | 是 |
| 主要目的： | SONET/SDH |
| 输入： | CML |
| 输出： | CML |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:2 |
| 差分 - 输入:输出： | 是/是 |
| 频率 - 最大： | 2.7GHz |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 32-LFCSP-VQ（5x5） |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页
ADN2817/ADN2818
Data Sheet
Rev. E | Page 22 of 40
FUNCTIONAL DESCRIPTION
FREQUENCY ACQUISITION
The ADN2817/ADN2818 acquire frequency from the data over
a range of data frequencies from 10 Mbps to 2.7 Gbps. The lock
detector circuit compares the frequency of the VCO and the
frequency of the incoming data. When these frequencies differ
by more than 1000 ppm, LOL is asserted. This initiates a fre-
quency acquisition cycle. The VCO frequency is reset to the
bottom of its range, which is 10 MHz. The frequency detector
compares this VCO frequency and the incoming data frequency
and increments the VCO frequency, if necessary. Initially, the
VCO frequency is incremented in large steps to aid fast acquisi-
tion. As the VCO frequency approaches the data frequency, the
step size is reduced until the VCO frequency is within 250 ppm
of the data frequency, at which point LOL is deasserted.
Once LOL is deasserted, the frequency-locked loop is turned off.
The phase- and delay-locked loop (PLL/DLL) pulls in the VCO
frequency until the VCO frequency equals the data frequency.
The frequency loop requires a single external capacitor between
CF1 and CF2, Pin 14 and Pin 15. A 0.47 F ± 20%, X7R ceramic
chip capacitor with <10 nA leakage current is recommended.
Leakage current of the capacitor can be calculated by dividing
the maximum voltage across the 0.47 F capacitor, ~3 V, by the
insulation resistance of the capacitor. The insulation resistance
of the 0.47 μF capacitor should be greater than 300 M.
LOCK DETECTOR OPERATION
The lock detector on the ADN2817/ADN2818 has three modes
of operation: normal mode, REFCLK mode, and static LOL mode.
Normal Mode
In normal mode, the ADN2817/ADN2818 function as continuous
rate CDRs that lock onto any data rate from 10 Mbps to 2.7 Gbps
without the use of a reference clock as an acquisition aid. In this
mode, the lock detector monitors the frequency difference between
the VCO and the input data frequency, and deasserts the loss of
lock signal that appears on LOL (Pin 16) when the VCO is within
250 ppm of the data frequency. This enables the delay- and phase-
locked loop (DLL/PLL), which pulls the VCO frequency in the
remaining amount and acquires phase lock. When locked, if the
input frequency error exceeds 1000 ppm (0.1%), the loss of lock
signal is reasserted and control returns to the frequency loop,
which begins a new frequency acquisition starting at the lowest
point in the VCO operating range, 10 MHz. The LOL pin remains
asserted until the VCO locks onto a valid input data stream to
within 250 ppm frequency error. This hysteresis is shown in
LOL
0
–250
250
1000
fVCO ERROR
(ppm)
–1000
1
06001-
019
Figure 30. Transfer Function of LOL
LOL Detector Operation Using a Reference Clock
In this mode, a reference clock is used as an acquisition aid to
lock the ADN2817/ADN2818 VCO. Lock to reference mode is
enabled by setting CTRLA[0] to 1. The user also needs to write
to the CTRLA[7:6] and CTRLA[5:2] bits to set the reference
frequency range and the divide ratio of the data rate with respect
to the reference frequency. For more details, see the Reference
Clock (Optional) section. In this mode, the lock detector monitors
the difference in frequency between the divided down VCO and
the divided down reference clock. The loss of lock signal, which
appears on LOL (Pin 16), is deasserted when the VCO is within
250 ppm of the desired frequency. This enables the DLL/ PLL,
which pulls the VCO frequency in the remaining amount with
respect to the input data and acquires phase lock. Once locked, if
the input frequency error exceeds 1000 ppm (0.1%), the loss of
lock signal is reasserted and control returns to the frequency loop,
which reacquires with respect to the reference clock. The LOL pin
remains asserted until the VCO frequency is within 250 ppm of the
desired frequency. This hysteresis is shown in Figure 30.
Static LOL Mode
The ADN2817/ADN2818 implement a static LOL feature, which
indicates if a loss of lock condition has ever occurred and remains
asserted, even if the ADN2817/ADN2818 regain lock, until the
static LOL bit is manually reset. I2C Register Bit MISC[4] is the
static LOL bit. If there is ever an occurrence of a loss of lock
condition, this bit is internally asserted to logic high. The MISC[4]
bit remains high even after the ADN2817/ADN2818 reacquire
lock to a new data rate. This bit can be reset by writing a 1 followed
by 0 to I2C Register Bit CTRLB[6]. When reset, the MISC[4] bit
remains deasserted until another loss of lock condition occurs.
Writing a 1 to I2C Register Bit CTRLB[7] causes the LOL pin,
Pin 16, to become a static LOL indicator. In this mode, the LOL
pin mirrors the contents of the MISC[4] bit and has the function-
ality described previously. The CTRLB[7] bit defaults to 0. In
this mode, the LOL pin operates in the normal operating mode,
that is, it is asserted only when the ADN2817/ ADN2818 are in
acquisition mode and deasserts when the ADN2817/ADN2818
reacquire lock.
相关PDF资料 |
PDF描述 |
|---|---|
| MS27472E24B35SA | CONN RCPT 128POS WALL MNT W/SCKT |
| MS27468T25B19P | CONN RCPT 19POS JAM NUT W/PINS |
| SY87701LZG | IC CLOCK/DATA RECOVERY 28-SOIC |
| VI-21Z-MV-F2 | CONVERTER MOD DC/DC 2V 60W |
| SY87721LHY TR | IC CLOCK/DATA RECOVERY 64-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADN2819 | 制造商:AD 制造商全称:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
| ADN2819ACP-CML | 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP Tray 制造商:Rochester Electronics LLC 功能描述:MULTI-RATE 2.7GBPS CDR/ PA LOW POWER I.C - Bulk |
| ADN2819ACP-CML-RL | 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP T/R |
| ADN2819ACPZ-CML | 功能描述:IC CLOCK/DATA RECOVERY 48LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP （0.240"，6.10mm 宽） 供应商设备封装:64-TSSOP 包装:管件 |
| ADN2819ACPZ-CML1 | 制造商:AD 制造商全称:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
发布紧急采购，3分钟左右您将得到回复。