参数资料
型号: ATMEGA103-6AI
厂商: Atmel
文件页数: 102/141页
文件大小: 0K
描述: IC MCU 128K 6MHZ A/D IT 64TQFP
产品培训模块: megaAVR Introduction
标准包装: 90
系列: AVR® ATmega
核心处理器: AVR
芯体尺寸: 8-位
速度: 6MHz
连通性: SPI,UART/USART
外围设备: POR,PWM,WDT
输入/输出数: 32
程序存储器容量: 128KB(64K x 16)
程序存储器类型: 闪存
EEPROM 大小: 4K x 8
RAM 容量: 4K x 8
电压 - 电源 (Vcc/Vdd): 4 V ~ 5.5 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 64-TQFP
包装: 托盘
配用: ATSTK501-ND - ADAPTER KIT FOR 64PIN AVR MCU
63
ATmega103(L)
0945I–AVR–02/07
Bit 5 – DORD: Data Order
When the DORD bit is set (one), the LSB of the data word is transmitted first.
When the DORD bit is cleared (zero), the MSB of the data word is transmitted first.
Bit 4 – MSTR: Master/Slave Select
This bit selects Master SPI mode when set (one), and Slave SPI mode when cleared
(zero). If SS is configured as an input and is driven low while MSTR is set, MSTR will be
cleared and SPIF in SPSR will become set. The user will then have to set MSTR to re-
enable SPI Master mode.
Bit 3 – CPOL: Clock Polarity
When this bit is set (one), SCK is high when idle. When CPOL is cleared (zero), SCK is
low when idle. Refer to Figure 39 and Figure 40 for additional information.
Bit 2 – CPHA: Clock Phase
Refer to Figure 39 or Figure 40 for the functionality of this bit.
Bits 1, 0 – SPR1, SPR0: SPI Clock Rate Select 1 and 0
These two bits control the SCK rate of the device configured as a Master. SPR1 and
SPR0 have no effect on the Slave. The relationship between SCK and the CPU Clock
frequency (f
cl) is shown in Table 23.
Note:
Observe that CPU clock frequency can be lower than the XTAL frequency if the XTAL
divider is enabled.
SPI Status Register – SPSR
Bit 7 – SPIF: SPI Interrupt Flag
When a serial transfer is complete, the SPIF bit is set (one) and an interrupt is gener-
ated if SPIE in SPCR is set (one) and Global Interrupts are enabled. SPIF is cleared by
hardware when executing the corresponding interrupt handling vector. Alternatively, the
SPIF bit is cleared by first reading the SPI Status Register with SPIF set (one), then
accessing the SPI Data Register (SPDR).
Bit 6 – WCOL: Write Collision Flag
The WCOL bit is set if the SPI Data Register (SPDR) is written during a data transfer.
The WCOL bit (and the SPIF bit) are cleared (zero) by first reading the SPI Status Reg-
ister with WCOL set (one), and then accessing the SPI Data Register.
Table 23. Relationship between SCK and the Oscillator Frequency
SPR1
SPR0
SCK Frequency
00
f
cl/4
01
f
cl/16
10
f
cl/64
11
f
cl/128
Bit
7654
321
0
$0E
SPIF
WCOL
SPSR
Read/Write
R
Initial Value
0000
000
0
相关PDF资料
PDF描述
ATMEGA128A-AUR MCU AVR 128K FLASH 16MHZ 64TQFP
ATMEGA128L-8MJ IC MCU AVR 128K 8MHZ LV 64-QFN
ATMEGA16-16MUR MCU AVR 16KB FLASH 16MHZ 44QFN
ATMEGA164PA-AN IC MCU AVR 16K FLASH 44TQFP
ATMEGA164PA-CUR MCU AVR 16KB FLASH 20MHZ 49VFBGA
相关代理商/技术参数
参数描述
ATMEGA103L 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit Microcontroller with 128K Bytes In-System Programmable Flash
ATMEGA103L-4AC 功能描述:8位微控制器 -MCU TQFP-64 128K FLASH 3 RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATMEGA103L-4AI 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-Bit Microcontroller with 64K/128K Bytes In-System Programmable Flash
ATMEGA128 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit Microcontroller with 128K Bytes In-System Programmable Flash
ATMEGA128(L) 制造商:未知厂家 制造商全称:未知厂家 功能描述:ATmega128(L) Preliminary Summary [Updated 9/03. 23 Pages]