参数资料
| 型号： | DS3106LN+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 40/92页 |
| 文件大小： | 0K |
| 描述： | IC TIMING LINE CARD 64-LQFP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 160 |
| 类型： | 定时卡 IC，多路复用器 |
| PLL： | 是 |
| 主要目的： | 以太网，SONET/SDH，Stratum，电信 |
| 输入： | CMOS，TTL |
| 输出： | CMOS，LVDS，LVPECL，TTL |
| 电路数： | 1 |
| 比率 - 输入:输出： | 2:2 |
| 差分 - 输入:输出： | 无/是 |
| 频率 - 最大： | 312.5MHz |
| 电源电压： | 1.62 V ~ 1.98 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-LQFP |
| 供应商设备封装： | 64-LQFP（10x10） |
| 包装： | 托盘 |
| 产品目录页面： | 1429 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页当前第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页
DS3106
45
Register Name:
FREQ1
Register Description:
Frequency Register 1
Register Address:
0Ch
Bit #
7
6
5
4
3
2
1
0
Name
FREQ[7:0]
Default
0
Note: The FREQ1, FREQ2, and FREQ3 registers must be read consecutively. See Section 8.3.
Bits 7 to 0: Current DPLL Frequency (FREQ[7:0]). The full 19-bit FREQ[18:0] field spans this register, FREQ2,
and FREQ3. FREQ is a two’s-complement signed integer that expresses the current frequency as an offset with
respect to the master clock frequency (see Section 7.3). Because the value in this register field is derived from the
DPLL integral path, it can be considered an average frequency with a rate of change inversely proportional to the
DPLL bandwidth. If LIMINT = 1 in the MCR9 register, the value of FREQ freezes when the DPLL reaches its
minimum or maximum frequency. The frequency offset in ppm is equal to FREQ[18:0]
× 0.0003068. See Section
Application Note: Frequency measurements are relative, i.e., they measure the frequency of the selected reference
with respect to the local oscillator. As such, when a frequency difference exists, it is difficult to distinguish whether
the selected reference is off frequency or the local oscillator is off frequency. In systems with timing card
redundancy, the use of two timing cards, master and slave, can address this difficulty. Both master and slave have
separate local oscillators, and each measures the selected reference. These two measurements provide the
necessary information to distinguish which reference is off frequency, if we make the simple assumption that at
most one reference has a significant frequency deviation at any given time (i.e., a single point of failure). If both
master and slave indicate a significant frequency offset, then the selected reference must be off frequency. If the
master indicates a frequency offset but the slave does not, then the master’s local oscillator must be off frequency.
Likewise, if the slave indicates a frequency offset but the master does not, the slave’s local oscillator must be off
frequency.
Register Name:
FREQ2
Register Description:
Frequency Register 2
Register Address:
0Dh
Bit #
7
6
5
4
3
2
1
0
Name
FREQ[15:8]
Default
0
Bits 7 to 0: Current DPLL Frequency (FREQ[15:8]). See the FREQ1 register description.
相关PDF资料 |
PDF描述 |
|---|---|
| DS3231MZ+ | IC RTC I2C 8SOIC |
| DS3231SN#T&R | IC RTC W/TCXO 16-SOIC |
| DS3232MZ+ | IC RTC W/SRAM I2C 8SOIC |
| DS3232SN#T&R | IC RTC W/TCXO 20-SOIC |
| DS3234S# | IC RTC W/TCXO 20-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS3106LN+ | 功能描述:计时器和支持产品 Line Card Timing IC RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| DS3107FP000 | 制造商:Thomas & Betts 功能描述:30A,CON,2P3W,MG,107,125V |
| DS3107FRAB0 | 制造商:Thomas & Betts 功能描述:30A,REC,2P3W,MG,107,AB0,125,SC |
| DS3107MP000 | 制造商:Thomas & Betts 功能描述:30A,PLG,2P3W,MG,107,125V |
| DS3107MP00K | 制造商:Thomas & Betts 功能描述:30A,PLG,2P3W,MG,107,125V,CC |
发布紧急采购，3分钟左右您将得到回复。