- 您现在的位置：买卖IC网 > PDF目录9903 > IDT72T18105L10BB (IDT, Integrated Device Technology Inc)IC FIFO 131X18 2.5V 10NS 24BGA PDF资料下载
参数资料
| 型号： | IDT72T18105L10BB |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 26/55页 |
| 文件大小： | 0K |
| 描述： | IC FIFO 131X18 2.5V 10NS 24BGA |
| 标准包装： | 1 |
| 系列： | 72T |
| 功能： | 异步，同步 |
| 存储容量： | 2.3K（131 x 18） |
| 数据速率： | 10MHz |
| 访问时间： | 10ns |
| 电源电压： | 2.375 V ~ 2.625 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 240-BGA |
| 供应商设备封装： | 240-PBGA（19x19） |
| 包装： | 托盘 |
| 其它名称： | 72T18105L10BB |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页
32
COMMERCIALANDINDUSTRIAL
TEMPERATURERANGES
IDT72T1845/55/65/75/85/95/105/115/125 2.5V TeraSync 18-BIT/9-BIT FIFO 2Kx18/4Kx9, 4Kx18/
8Kx9, 8Kx18/16Kx9, 16Kx18/32Kx9, 32Kx18/64Kx9, 64Kx18/128Kx9, 128Kx18/256Kx9, 256Kx18/512Kx9, 512Kx18/1Mx9
FEBRUARY 10, 2009
THE INSTRUCTION REGISTER
TheInstructionregisterallowsaninstructiontobeshiftedinseriallyintothe
processor at the rising edge of TCLK.
The Instruction is used to select the test to be performed, or the test data
registertobeaccessed,orboth. Theinstructionshiftedintotheregisterislatched
at the completion of the shifting process when the TAP controller is at Update-
IRstate.
The instruction register must contain 4 bit instruction register-based cells
whichcanholdinstructiondata. Thesemandatorycellsarelocatednearestthe
serial outputs they are the least significant bits.
TEST DATA REGISTER
The Test Data register contains three test data registers: the Bypass, the
Boundary Scan register and Device ID register.
These registers are connected in parallel between a common serial input
and a common serial data output.
The following sections provide a brief description of each element. For a
completedescription,refertotheIEEEStandardTestAccessPortSpecification
(IEEE Std. 1149.1-1990).
TEST BYPASS REGISTER
The register is used to allow test data to flow through the device from TDI
toTDO. Itcontainsasinglestageshiftregisterforaminimumlengthinserialpath.
When the bypass register is selected by an instruction, the shift register stage
is set to a logic zero on the rising edge of TCLK when the TAP controller is in
the Capture-DR state.
The operation of the bypass register should not have any effect on the
operation of the device in response to the BYPASS instruction.
THE BOUNDARY-SCAN REGISTER
The Boundary Scan Register allows serial data TDI be loaded in to or read
out of the processor input/output ports. The Boundary Scan Register is a part
of the IEEE 1149.1-1990 Standard JTAG Implementation.
THE DEVICE IDENTIFICATION REGISTER
The Device Identification Register is a Read Only 32-bit register used to
specify the manufacturer, part number and version of the processor to be
determined through the TAP in response to the IDCODE instruction.
IDT JEDEC ID number is 0xB3. This translates to 0x33 when the parity is
dropped in the 11-bit Manufacturer ID field.
For the IDT72T1845/72T1855/72T1865/72T1875/72T1885/72T1895/
72T18105/72T18115/72T18125, the Part Number field contains the following
values:
IDT72T1845/55/65/75/85/95/105/115/125 JTAG Device Identification Register
31(MSB)
28 27
12 11
1 0(LSB)
Version (4 bits)
Part Number (16-bit) Manufacturer ID (11-bit)
0X0
0X33
1
JTAG INSTRUCTION REGISTER
TheInstructionregisterallowsinstructiontobeseriallyinputintothedevice
when the TAP controller is in the Shift-IR state. The instruction is decoded to
perform the following:
Select test data registers that may operate while the instruction is
current. The other test data registers should not interfere with chip
operation and the selected data register.
Definetheserialtestdataregisterpaththatisusedtoshiftdatabetween
TDI and TDO during data register scanning.
The Instruction Register is a 4 bit field (i.e. IR3, IR2, IR1, IR0) to decode
16 different possible instructions. Instructions are decoded as follows.
Hex
Instruction
Function
Value
0x00
EXTEST
Select Boundary Scan Register
0x02
IDCODE
SelectChipIdentificationdataregister
0x01
SAMPLE/PRELOAD
Select Boundary Scan Register
0x03
HIGH-IMPEDANCE
JTAG
0x0F
BYPASS
Select Bypass Register
JTAG Instruction Register Decoding
The following sections provide a brief description of each instruction. For
acompletedescriptionrefertotheIEEEStandardTestAccessPortSpecification
(IEEE Std. 1149.1-1990).
EXTEST
The required EXTEST instruction places the IC into an external boundary-
testmodeandselectstheboundary-scanregistertobeconnectedbetweenTDI
and TDO. During this instruction, the boundary-scan register is accessed to
drive test data off-chip via the boundary outputs and receive test data off-chip
via the boundary inputs. As such, the EXTEST instruction is the workhorse of
IEEE. Std 1149.1, providing for probe-less testing of solder-joint opens/shorts
and of logic cluster function.
IDCODE
TheoptionalIDCODEinstructionallowstheICtoremaininitsfunctionalmode
andselectstheoptionaldeviceidentificationregistertobeconnectedbetween
TDIandTDO.Thedeviceidentificationregisterisa32-bitshiftregistercontaining
information regarding the IC manufacturer, device type, and version code.
Accessingthedeviceidentificationregisterdoesnotinterferewiththeoperation
oftheIC.Also,accesstothedeviceidentificationregistershouldbeimmediately
available, via a TAP data-scan operation, after power-up of the IC or after the
TAP has been reset using the optional
TRSTpinorbyotherwisemovingtothe
Test-Logic-Resetstate.
SAMPLE/PRELOAD
The required SAMPLE/PRELOAD instruction allows the IC to remain in a
normalfunctionalmodeandselectstheboundary-scanregistertobeconnected
between TDI and TDO. During this instruction, the boundary-scan register can
be accessed via a date scan operation, to take a sample of the functional data
enteringandleavingtheIC.Thisinstructionisalsousedtopreloadtestdatainto
the boundary-scan register before loading an EXTEST instruction.
Device
Part# Field
IDT72T1845
040E
IDT72T1855
040D
IDT72T1865
040C
IDT72T1875
040B
IDT72T1885
040A
IDT72T1895
0409
IDT72T18105
0419
IDT72T18115
0418
IDT72T18125
0417
相关PDF资料 |
PDF描述 |
|---|---|
| MS27508E14B15PA | CONN RCPT 15POS BOX MNT W/PINS |
| V48A28T500BL2 | CONVERTER MOD DC/DC 28V 500W |
| MS27656T15F35PC | CONN RCPT 37POS WALL MNT W/PINS |
| V48A28T500BL | CONVERTER MOD DC/DC 28V 500W |
| V48A28T500B3 | CONVERTER MOD DC/DC 28V 500W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT72T18105L4-4BB | 功能描述:IC FIFO 131X18 2.5V 4NS 240BGA RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72T 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72T18105L4-4BBG | 功能描述:IC FIFO 131072X18 SYNC 240BGA RoHS:是 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72T 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72T18105L5BB | 功能描述:IC FIFO 131X18 2.5V 5NS 240BGA RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72T 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72T18105L5BBGI | 制造商:Integrated Device Technology Inc 功能描述:IC FIFO 131X18 2.5V 5NS 240BGA |
| IDT72T18105L5BBI | 功能描述:IC FIFO 131X18 2.5V 5NS 240BGA RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72T 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
发布紧急采购，3分钟左右您将得到回复。