
L64005 MPEG-2 Audio/Video Decoder Technical Manual
9-15
Final Rev F
Copyright 1996 by LSI Logic Corporation. All rights reserved.
1. Specied at VDD equals 3.3 V ± 5% at ambient temperature over the specied range.
2. For CMOS and TLL inputs.
3. Not more than one output may be shorted at a time for a maximum duration of one second.
4. These values scale proportionally for output buffers with different drive strengths.
9.3
Pin Summary
Table 9.7 summarizes the L64005 pins. The table provides the drive
capacity of the outputs and the signal types for both output and input
pins.
Table 9.6
DC Characteristics
Symbol
Parameter
Condition1
Min
Typ
Max
Units
VIL
Voltage Input Low
TTL
CMOS
–
0.8
0.2 VDD
V
VIH
Voltage Input High
TTL
CMOS
5 V Compatible
2.0
0.7 VDD
2.0
–
5.5
V
VOL
Voltage Output Low
4-mA Output Buffers
8-mA Output Buffers
IOL = 4.0 mA
IOL = 8.0 mA
–
0.2
0.4
V
VOH
Voltage Output High
4-mA Output Buffers
8-mA Output Buffers
IOH = -4.0 mA
IOH = -8.0 mA
2.4
–
V
IIL
Current Input Leakage2
with Pulldown
with Pull-up
VIN =VDD or VSS
VIN = VDD
VIN = VSS
-10
35
-214
±10
115
-115
+10
222
-35
A
IOZ
Current 3-State Output Leakage
VDD = Max, VOUT =VSS or
VDD
-10
±1
+10
A
IOSP4
Current P-Channel Output Short
Circuit (4-mA Output Buffers)3, 4
VDD = Max, VOUT =VSS
-117
-75
-40
mA
IOSN4
Current N-Channel Output Short
Circuit (4-mA Output Buffers)
3, 4VDD = Max, VOUT =VDD
37
90
140
mA
IDD
Quiescent Supply Current
VIN = VDD or VSS
–10–
mA
ICC
Dynamic Supply Current
VDD = Max, f = 27 MHz
–
300
–
mA