- 您现在的位置：买卖IC网 > PDF目录69009 > M30240M5-XXXFP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80 PDF资料下载
参数资料
| 型号： | M30240M5-XXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80 |
| 封装： | 0.80 MM PITCH, PLASTIC, QFP-80 |
| 文件页数： | 92/139页 |
| 文件大小： | 1453K |
| 代理商： | M30240M5-XXXFP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页当前第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页
56
Mitsubishi microcomputers
M30240 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Specifications REV. G
Specifications in this manual are tentative and subject to change
Universal Serial Bus
1.2.18.4.13 USB Endpoint 0 OUT Write Count Register
The USB Endpoint 0 OUT Write Count (WRT CNT) Register, shown in Figure 1.46, contains the number of
bytes of the current data set in the OUT FIFO. The USB FCU sets the value in the Write Count Register after
having successfully received a packet of data from the host. The CPU reads the register to determine the number
of bytes to be read from the FIFO.
Figure 1.46: USB Endpoint 0 OUT WRT CNT
1.2.18.4.14 USB Endpoint x IN Control and Status Register
The USB Endpoint x IN CSR (Control and Status Register), shown in Figure 1.47, contains control and status
information of the respective IN endpoint 1-4.
INxCSR0 (IN_PKT_RDY) and INxCSR5 (TX_FIFO_NOT_EMPTY):
These two bits are for IN FIFO status when in read operation (see “IN (Transmit) FIFO” operation for details).
The CPU writes a “1” to the INxCSR0 bit to inform the USB FCU that a packet of data is written to the FIFO.
The USB FCU updates the pointers up on this bit set. The USB FCU also updates the pointers upon a packet
of data successfully sent to the host. When the pointer updates are completed, the IN FIFO status is shown
on INxCSR0 and INxCSR5 bits for the CPU to read. The CPU must allow at least one wait state between writ-
ing and reading these bits for proper FIFO status.
INxCSR1 (UNDER_RUN):
This bit is used in ISO mode only to indicate to the CPU that a FIFO underrun has occurred. The USB FCU
sets this bit to a “1” at the beginning of an IN token if no data packet is in the FIFO. Setting this bit causes the
INST12 bit of the Interrupt Status Register 2 to set. The CPU writes a “0” to clear this bit.
INxCSR2 (SEND_STALL):
The CPU writes a “1” to this bit when the endpoint is stalled (transmitter halt). The USB FCU returns a STALL
handshake while this bit is set. The CPU writes a “0” to clear this bit.
INxCSR3 (ISO/TOGGLE_INIT):
When the endpoint is used for isochronous data transfer, the CPU sets this bit to a “1” for the entire duration
of the isochronous transfer. With the ISO bit set to a “1”, the device uses DATA0 as the pid for all packets sent
back to the host.
When the endpoint is required to initialize the data toggle, this set/reset of the TOGGLE_INIT bit method as-
sumes that there is no activity IN transaction to the respective endpoint on the bus at the time the initialization
process is ongoing. Set/reset of the TOGGLE_INIT bit is performed only when an endpoint experiences a con-
figuration event.
INxCSR4 (INTPT):
The CPU writes a “1” to this bit to initialize this endpoint as a status change endpoint for IN transactions. This
bit is set only when the corresponding endpoint is to be used to communicate rate feedback information (see
Chapter. IN (Transmit) FIFOs for details).
INxCSR5 (TX_FIFO_NOT_EPT):
The USB FCU sets this bit to a “1” when there is at least one data packet in the IN FIFO. This bit, in conjunction
with IN_PKT_RDY bit, provides the transmit IN FIFO status information (see “IN (Transmit) FIFO” for details).
INxCSR6 (FLUSH):
USB Endpoint 0 OUT Write Count Register
Symbol
Address
When reset
EP0WC
031516
0016
Bit name
Bit symbol
b7
b6
b5
b4
b3
b2
b1
b0
W_CNT0 to
W_CNT4
Function
W
R
Receive byte count
Reserved
Must always be set to "0"
X
0 0 0
相关PDF资料 |
PDF描述 |
|---|---|
| M30240M6-XXXXFP | 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80 |
| M30240ECFP | 16-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP80 |
| M30240M5-XXXXFP | 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80 |
| M30240M6-XXXXFP | 16-BIT, OTPROM, MICROCONTROLLER, PQFP80 |
| M30240ECFP | 16-BIT, OTPROM, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M30240M6 | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M30240M6-XXXFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M30240M7 | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M30240M7-XXXFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M30240M8 | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。