参数资料
型号: MC68HC05V7FN
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
封装: PLASTIC, LCC-68
文件页数: 11/170页
文件大小: 589K
代理商: MC68HC05V7FN
MOTOROLA
SECTION 15: MESSAGE DATA LINK CONTROLLER
Page 94
MC68HC05V7 Specification Rev. 1.0
15.1.2.2
Reset
This mode is entered from the Power Off mode whenever the MCU supply voltage VDD
rises above the minimum specified value and some MCU reset source is asserted. In order
to prevent an unknown state from being entered and to guarantee correct operation, the
internal MCU reset will be asserted while the MDLC module is being powered up.
This mode is entered from any other mode whenever the MCU supply voltage VDD drops
below the minimum value for correct MDLC operation. When this occurs, the MDLC module
will reenter the Reset mode before being powered down to prevent an unknown state from
being entered.
The Reset mode is also entered from any other mode as soon as one of the MCU’s possible
reset sources (for example, POR, COP watchdog, Reset pin etc.) is asserted.
In this mode, the internal MDLC voltage references are operative, VDD is supplied to the
internal circuits, which are held in their reset state and the internal MDLC system clock is
running. Registers will assume their reset condition. Outputs are held in their programmed
reset state, inputs and network activity are ignored.
15.1.2.3
Run
This mode is entered from the Reset mode after all MCU reset sources are no longer
asserted. It is entered from the MDLC Wait mode whenever a message is successfully
received.
It is entered from the MDLC Stop mode whenever network activity is sensed though
messages will not be received properly until the clocks have stabilized and the CPU is also
in the Run mode.
In this mode, normal network operation takes place. The user should ensure that all MDLC
transmissions have ceased before exiting this mode.
15.1.2.4
MDLC Wait
This power conserving mode is automatically entered from the Run mode whenever the
CPU executes a WAIT instruction and if the WCM bit in the MCR register is previously
cleared.
In this mode, the MDLC internal clocks continue to run but the physical interface circuitry is
placed in a low power mode and awaits a valid network message. If a valid network
message is successfully received (RXMS=1) a CPU interrupt request will be generated.
15.1.2.5
MDLC Stop
This power conserving mode is automatically entered from the Run mode whenever the
CPU executes a STOP instruction, or if the CPU executes a WAIT instruction and the WCM
bit in the MCR register is previously set.
In this mode, the MDLC internal clocks are stopped but the physical interface circuitry is
placed in a low power mode and awaits network activity. If network activity is sensed, then
a CPU interrupt request will be generated, restarting the MDLC internal clocks.
相关PDF资料
PDF描述
MC68HC05V7CB 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP56
MC68HC05V7CFU 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP64
MC68HC05X16FU 8-BIT, MROM, MICROCONTROLLER, PQFP64
MC68HC705X32FU 8-BIT, OTPROM, MICROCONTROLLER, PQFP64
MC68HC05X16MFU 8-BIT, MROM, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
MC68HC05X16 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X32 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X4 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4CDW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4DW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit