收藏本站
参数资料
型号： MP80C31-12D
厂商： ATMEL CORP
元件分类： 微控制器/微处理器
英文描述： 8-BIT, 12 MHz, MICROCONTROLLER, PDIP40
封装： PLASTIC, DIP-40
文件页数： 113/170页
文件大小： 4133K
代理商： MP80C31-12D
47
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
Table 10-2 on page 47 summarizes the function of the overriding signals. The pin and port indexes from Figure 10-
6 on page 46 are not shown in the succeeding tables. The overriding signals are generated internally in the mod-
ules having the alternate function.
The following subsections shortly describe the alternate functions for each port, and relate the overriding signals to
the alternate function. Refer to the alternate function description for further details.
Table 10-2.
Generic Description of Overriding Signals for Alternate Functions
Signal Name
Full Name
Description
PUOE
Pull-up Override
Enable
If this signal is set, the pull-up enable is controlled by the PUOV
signal. If this signal is cleared, the pull-up is enabled when
PUExn = 0b1.
PUOV
Pull-up Override
Value
If PUOE is set, the pull-up is enabled/disabled when PUOV is
set/cleared, regardless of the setting of the PUExn Register bit.
DDOE
Data Direction
Override Enable
If this signal is set, the Output Driver Enable is controlled by the
DDOV signal. If this signal is cleared, the Output driver is
enabled by the DDxn Register bit.
DDOV
Data Direction
Override Value
If DDOE is set, the Output Driver is enabled/disabled when
DDOV is set/cleared, regardless of the setting of the DDxn
Register bit.
PVOE
Port Value
Override Enable
If this signal is set and the Output Driver is enabled, the port
value is controlled by the PVOV signal. If PVOE is cleared, and
the Output Driver is enabled, the port Value is controlled by the
PORTxn Register bit.
PVOV
Port Value
Override Value
If PVOE is set, the port value is set to PVOV, regardless of the
setting of the PORTxn Register bit.
PTOE
Port Toggle
Override Enable
If PTOE is set, the PORTxn Register bit is inverted.
DIEOE
Digital Input
Enable Override
Enable
If this bit is set, the Digital Input Enable is controlled by the
DIEOV signal. If this signal is cleared, the Digital Input Enable
is determined by MCU state (Normal mode, sleep mode).
DIEOV
Digital Input
Enable Override
Value
If DIEOE is set, the Digital Input is enabled/disabled when
DIEOV is set/cleared, regardless of the MCU state (Normal
mode, sleep mode).
DI
Digital Input
This is the Digital Input to alternate functions. In the figure, the
signal is connected to the output of the schmitt-trigger but
before the synchronizer. Unless the Digital Input is used as a
clock source, the module with the alternate function will use its
own synchronizer.
AIO
Analog
Input/Output
This is the Analog Input/Output to/from alternate functions. The
signal is connected directly to the pad, and can be used bi-
directionally.
相关PDF资料
PDF描述
MF280C51-20R 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
MS80C51-30R 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQCC44
MS80C51-20D 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQCC44
MF280C31-25R 8-BIT, 25 MHz, MICROCONTROLLER, PQFP44
MF180C31-16D 8-BIT, 16 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
MP81 制造商:未知厂家 制造商全称:未知厂家 功能描述:BRIDGE RECTIFIERS
MP810 制造商:GOOD-ARK 制造商全称:GOOD-ARK Electronics 功能描述:SILICON BRIDGE RECTIFIERS
MP-810 制造商:JAMECO BENCHPRO 功能描述:4-Piece Plier/Cutter/Screwdrivers Set
MP8100 制造商:MPS 制造商全称:Monolithic Power Systems 功能描述:Precision High-Side Current-Sense Amplifier
MP8100DS 制造商:MPS 制造商全称:Monolithic Power Systems 功能描述:Precision High-Side Current-Sense Amplifier
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*