参数资料
型号: SSTUP32866EC/S
厂商: NXP SEMICONDUCTORS
元件分类: 锁存器
英文描述: 32866 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96
封装: 13.50 X 5.50 MM, 1.05 MM HEIGHT, LEAD FREE, PLASTIC, SOT-536-1, LFBGA-96
文件页数: 24/31页
文件大小: 538K
代理商: SSTUP32866EC/S
SSTUP32866_2
Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 02 — 14 September 2006
30 of 31
Philips Semiconductors
SSTUP32866
1.8 V DDR2-667/800 programmable registered buffer with parity
16. Legal information
16.1
Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Denitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.semiconductors.philips.com.
16.2
Denitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Philips Semiconductors
sales ofce. In case of any inconsistency or conict with the short data sheet,
the full data sheet shall prevail.
16.3
Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a Philips Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Philips Semiconductors accepts no liability for inclusion and/or use
of Philips Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specied use without further testing or modication.
Limiting values — Stress above one or more limiting values (as dened in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — Philips Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
pertaining to warranty, intellectual property rights infringement and limitation
of liability, unless explicitly otherwise agreed to in writing by Philips
Semiconductors. In case of any inconsistency or conict between information
in this document and such terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
16.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales ofce addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Document status[1][2]
Product status[3]
Denition
Objective [short] data sheet
Development
This document contains data from the objective specication for product development.
Preliminary [short] data sheet
Qualication
This document contains data from the preliminary specication.
Product [short] data sheet
Production
This document contains the product specication.
相关PDF资料
PDF描述
SSTV16857EC POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA56
SSTV16859DGG,118 SSTV SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO64
SSTV16859BS,118 SSTV SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PQCC56
SSTV16859EC,518 SSTV SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA96
ST10F168-Q2 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
SSTV01T1 制造商:Vishay Siliconix 功能描述:SS T092 DL XSTR PNP 30V -LEAD FREE - Tape and Reel
SSTV01-T1-E3 制造商:Vishay Intertechnologies 功能描述: 制造商:Vishay Siliconix 功能描述:FIELD EFFECT TRANSISTOR
SSTV16857 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:14-bit SSTL_2 registered driver with differential clock inputs
SSTV16857_ZBA30062 WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
SSTV16857_ZBA31162 WAF 制造商:Fairchild Semiconductor Corporation 功能描述: