参数资料
型号: ST40RA200XH6E
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 200 MHz, RISC PROCESSOR, PBGA372
封装: 27 X 27 MM, 2.33 MM HEIGHT, PLASTIC, BGA-372
文件页数: 7/94页
文件大小: 2144K
代理商: ST40RA200XH6E
B Implementation restrictions
ST40RA
15/92
B
Implementation restrictions
B.1
ST40 CPU
B.1.1
tas.b
The atomicity of the tas.b instruction is only guaranteed for processes executing on the ST40 CPU
core and should not be used to implement intermodule or interchip semaphores. Either use the
mailbox functionality or an appropriate software algorithm for such semaphores.
B.1.2
Store queue power-down
The store queue is considered part of the general CPU and independent power-down of this block
is not implemented.
B.1.3
UBC power-down
The UBC is considered part of the general CPU and independent power-down of this block is not
implemented.
B.1.4
System standby
To enter and leave standby it is necessary for the CPU to power down the system including memory
devices and then to enter standby by executing a sleep instruction. On leaving sleep and standby, it
may be necessary for the CPU to power itself up and subsequently power up the system and its
memory devices.
During the power-down and power-up sequences the main memory devices are not available. The
CPU therefore preloads the appropriate code into the cache as part of the power sequencing.
B.2
PCI
B.2.1
Clocking
PCI internal clock loop back is not implemented. To use the internal PCI clock, the pads
PCICLOCKOUT and PCICLOCKIN are connected to rollback the clock generator. Alternatively an
external clock source may be used.
B.2.2
Type 2 configuration accesses
Configuration space accesses to devices across a PCI bridge are implemented as type 2
operations on the PCI bus. In this implementation such accesses must be broken into a sequence of
byte operations. For example, access to a 32-bit register is through four single byte operations.
B.2.3
Software visible changes between STB1HC7 and ST40RAH8D
PCI PLL reprogramming required for H7 parts is no longer required for H8.
The PCI PLL register is renamed from PLLPCICR to CLKGENA.PLL2CR.
The register implementation for PCI MBAR mappings has changed between the STB1HC7 and
ST40RAH8D implementations and software device drivers should reflect this.
B.2.4
Error behavior
The implementation of local (PCI register) error handling is not fully implemented.
相关PDF资料
PDF描述
ST52510F3M6 MICROCONTROLLER, PDSO20
ST52E430B/D 8-BIT, UVPROM, 20 MHz, MICROCONTROLLER, CDIP32
ST52F510F1M6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDSO20
ST52F510G0B6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDIP28
ST52F513F0M6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDSO20
相关代理商/技术参数
参数描述
ST40RP 功能描述:两端交流开关元件 ST40RP RoHS:否 制造商:STMicroelectronics 转折电流 VBO:45 V 安装风格:SMD/SMT 封装 / 箱体:SOT-23 封装:Reel
ST40-TOOLSET/WIN 制造商:STMicroelectronics 功能描述:ST40-TOOLSET/WIN - Bulk
ST40X-10S-CV 制造商:Hirose 功能描述:
ST40X-10S-CV(80) 功能描述:I/O 连接器 10P CBLE PLUG STD SOLDER SHIELDED RoHS:否 制造商:Hirose Connector 产品:Plugs 系列:DH 端口数量: 位置/触点数量:51 节距:1 mm 触点电镀: 触点材料: 型式:Male 电流额定值:0.5 A 安装风格:Cable 端接类型:IDC 颜色: 安装角:
ST40X-10S-CVR 制造商:HRS 制造商全称:HRS 功能描述:Interface Connectors for Miniature, Portable Terminal Devices