- 您现在的位置：买卖IC网 > PDF目录19383 > ADSP-BF561SKBCZ-6V (Analog Devices Inc)IC DSP 32BIT 600MHZ 256CSPBGA PDF资料下载
参数资料
| 型号： | ADSP-BF561SKBCZ-6V |
| 厂商： | Analog Devices Inc |
| 文件页数： | 9/64页 |
| 文件大小： | 0K |
| 描述： | IC DSP 32BIT 600MHZ 256CSPBGA |
| 产品培训模块： | Blackfin® Processor Core Architecture Overview Blackfin® Device Drivers Blackfin® Optimizations for Performance and Power Consumption Blackfin® System Services |
| 标准包装： | 1 |
| 系列： | Blackfin® |
| 类型： | 定点 |
| 接口： | SPI，SSP，UART |
| 时钟速率： | 600MHz |
| 非易失内存： | 外部 |
| 芯片上RAM： | 328kB |
| 电压 - 输入/输出： | 2.50V，3.30V |
| 电压 - 核心： | 1.35V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 256-LFBGA，CSPBGA |
| 供应商设备封装： | 256-CSPBGA（12x12） |
| 包装： | 托盘 |
| 配用： | ADZS-BFAUDIO-EZEXT-ND - BOARD EVAL AUDIO BLACKFIN ADZS-BF561-EZLITE-ND - BOARD EVAL ADSP-BF561 ADZS-BF561-MMSKIT-ND - KIT STARTER MULTIMEDIA BF561 ADZS-BFAV-EZEXT-ND - BOARD DAUGHT ADSP-BF533,37,61KIT |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页
ADSP-BF561
f SCLK
2 × SPI_BAUD
After a reset, software can determine if the watchdog was the
source of the hardware reset by interrogating a status bit in the
timer control register, which is set only upon a watchdog gener-
ated reset.
The timer is clocked by the system clock (SCLK) at a maximum
frequency of f SCLK .
TIMERS
There are 14 programmable timer units in the ADSP-BF561.
Each of the 12 general-purpose timer units can be indepen-
dently programmed as a Pulse Width Modulator (PWM),
internally or externally clocked timer, or pulse width counter.
The general-purpose timer units can be used in conjunction
with the UART to measure the width of the pulses in the data
stream to provide an autobaud detect function for a serial chan-
nel. The general-purpose timers can generate interrupts to the
processor core providing periodic events for synchronization,
either to the processor clock or to a count of external signals.
In addition to the 12 general-purpose programmable timers,
another timer is also provided for each core. These extra timers
are clocked by the internal processor clock (CCLK) and are typ-
ically used as a system tick clock for generation of operating
system periodic interrupts.
SERIAL PORTS (SPORTs)
The ADSP-BF561 incorporates two dual-channel synchronous
serial ports (SPORT0 and SPORT1) for serial and multiproces-
sor communications. The SPORTs support the following
features:
? I 2 S capable operation.
? Bidirectional operation – Each SPORT has two sets of inde-
pendent transmit and receive pins, enabling eight channels
of I 2 S stereo audio.
? Buffered (8-deep) transmit and receive ports – Each port
has a data register for transferring data words to and from
other DSP components and shift registers for shifting data
in and out of the data registers.
? Clocking – Each transmit and receive port can either use an
external serial clock or generate its own, in frequencies
ranging from (f SCLK /131,070) Hz to (f SCLK /2) Hz.
? Word length – Each SPORT supports serial data words
from 3 bits to 32 bits in length, transferred most significant
bit first or least significant bit first.
? Framing – Each transmit and receive port can run with or
without frame sync signals for each data word. Frame sync
signals can be generated internally or externally, active high
or low, and with either of two pulse widths and early or late
frame sync.
? Companding in hardware – Each SPORT can perform
A-law or μ-law companding according to ITU recommen-
dation G.711. Companding can be selected on the transmit
and/or receive channel of the SPORT without additional
latencies.
? DMA operations with single-cycle overhead – Each SPORT
can automatically receive and transmit multiple buffers of
memory data. The DSP can link or chain sequences of
DMA transfers between a SPORT and memory.
? Interrupts – Each transmit and receive port generates an
interrupt upon completing the transfer of a data word or
after transferring an entire data buffer or buffers through
DMA.
? Multichannel capability – Each SPORT supports 128 chan-
nels out of a 1,024-channel window and is compatible with
the H.100, H.110, MVIP-90, and HMVIP standards.
An additional 250 mV of SPORT input hysteresis can be
enabled by setting Bit 15 of the PLL_CTL register. When this bit
is set, all SPORT input pins have the increased hysteresis.
SERIAL PERIPHERAL INTERFACE (SPI) PORT
The ADSP-BF561 processor has an SPI-compatible port that
enables the processor to communicate with multiple SPI-com-
patible devices.
The SPI interface uses three pins for transferring data: two data
pins (master output-slave input, MOSI, and master input-slave
output, MISO) and a clock pin (serial clock, SCK). An SPI chip
select input pin (SPISS) lets other SPI devices select the proces-
sor, and seven SPI chip select output pins (SPISEL7–1) let the
processor select other SPI devices. The SPI select pins are recon-
figured programmable flag pins. Using these pins, the SPI port
provides a full-duplex, synchronous serial interface which sup-
ports both master/slave modes and multimaster environments.
The baud rate and clock phase/polarities for the SPI port are
programmable, and it has an integrated DMA controller, con-
figurable to support transmit or receive data streams. The SPI
DMA controller can only service unidirectional accesses at any
given time.
The SPI port clock rate is calculated as:
SPI Clock Rate = ------------------------------------
Where the 16-bit SPI_BAUD register contains a value of 2 to
65,535.
During transfers, the SPI port simultaneously transmits and
receives by serially shifting data in and out on its two serial data
lines. The serial clock line synchronizes the shifting and sam-
pling of data on the two serial data lines.
UART PORT
The ADSP-BF561 processor provides a full-duplex universal
asynchronous receiver/transmitter (UART) port, which is fully
compatible with PC-standard UARTs. The UART port provides
a simplified UART interface to other peripherals or hosts, sup-
porting full-duplex, DMA-supported, asynchronous transfers of
serial data. The UART port includes support for 5 data bits to
8 data bits, 1 stop bit or 2 stop bits, and none, even, or odd par-
ity. The UART port supports two modes of operation:
Rev. E |
Page 9 of 64 |
September 2009
相关PDF资料 |
PDF描述 |
|---|---|
| VE-B1T-CV-F3 | CONVERTER MOD DC/DC 6.5V 150W |
| MC7915ACT | IC REG LDO -15V 1A TO220AB |
| MC7912ACT | IC REG LDO -12V 1A TO220AB |
| ADSP-2183KSTZ-210 | IC DSP CONTROLLER 16BIT 128-LQFP |
| ECM12DTBN-S189 | CONN EDGECARD 24POS R/A .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADSP-BF561SKBCZC70 | 制造商:Analog Devices 功能描述: |
| ADSPBF561SKBCZ-C70 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| ADSP-BF561SKBCZENG | 制造商:Analog Devices 功能描述:- Trays |
| ADSP-BF561SKBZ500 | 功能描述:IC DSP 32BIT 500MHZ 297PBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:Blackfin® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-BF561SKBZ500 | 制造商:Analog Devices 功能描述:Digital Signal Processor IC |
发布紧急采购，3分钟左右您将得到回复。