![](http://datasheet.mmic.net.cn/120000/PC34708VMR2_datasheet_3560223/PC34708VMR2_103.png)
Analog Integrated Circuit Device Data
Freescale Semiconductor
103
PC34708
Functional Block Requirements and Behaviors
32.768 kHz Crystal Oscillator RTC Block Description and Application Information
7.9.2.2
Real Time Clock
A Real Time Clock (RTC) is provided with time and day counters as well as an alarm function. The RTC utilizes the 32.768 kHz
crystal oscillator for the time base and is powered by the coin cell backup supply when BP has dropped below operational range.
In configurations where the SRTC is used, the RTC can be disabled to conserve current drain by setting the RTCDIS bit to a 1
(defaults on at power up).
Time and Day Counters
The 32.768 kHz clock is divided down to a 1.0 Hz time tick which drives a 17 bit Time Of Day (TOD) counter. The TOD counter
counts the seconds during a 24 hour period from 0 to 86,399 and will then roll over to 0. When the roll over occurs, it increments
the 15 bit DAY counter. The DAY counter can count up to 32767 days. The 1.0 Hz time tick can be used to generate a 1HZI
interrupt if unmasked.
Time Of Day Alarm
A Time Of Day Alarm (TODA) function can be used to turn on the application and alert the processor. If the application is already
on, the processor will be interrupted. The TODA and DAYA registers are used to set the alarm time. When the TOD counter is
equal to the value in TODA and the DAY counter is equal to the value in DAYA, the TODAI interrupt will be generated.
Timer Reset
As long as the supply at BP is valid, the real time clock will be supplied from VCOREDIG. If BP is not valid, the real time clock
can be backed up from a coin cell via the LICELL pin. When the VSRTC voltage drops to the range of 0.9 - 0.8 V, the RTCPORB
reset signal is generated and the contents of the RTC will be reset. Additional registers backed up by coin cell will also reset with
Table 106. VSRTC Electrical Specifications
Characteristics noted under conditions BP = 3.6 V, VBUS = 5.0 V, -40°C ≤ TA ≤ 85°C, unless otherwise noted. Typical values at
BP = 3.6 V and TA = 25°C under nominal conditions, unless otherwise noted.
Symbol
Characteristic
Min
Typ
Max
Unit
Notes
GENERAL
VSRTCIN
Operating Input Voltage Range VINMIN to VINMAX
Valid Coin Cell range
Valid BP
1.8
-
3.6
4.5
V
ISRTC
Operating Current Load Range ILMIN to ILMAX
0
-
50
μA
COSRTC
Bypass Capacitor Value
-
0.1
-
μF
VSRTC - ACTIVE MODE - DC
VSRTC
Output Voltage VOUT
VINMIN < VIN < VINMAX
ILMIN < IL < ILMAX
Off and coincell mode
1.15
1.20
1.28
V
VSRTC
Output Voltage VOUT
VINMIN < VIN < VINMAX
ILMIN < IL < ILMAX
PUMS[4:0] = (0110, 0111, 1000, 1001)
On mode (On, Standby, Standby LPM)
1.15
1.2
1.25
V
VSRTC
Output Voltage VOUT
VINMIN < VIN < VINMAX
ILMIN < IL < ILMAX
PUMS[4:0] = (0110, 0111, 1000, 1001)
On mode (On, Standby, Standby LPM)
1.25
1.3
1.35
V
ISRTCQ
Active Mode Quiescent Current
VINMIN < VIN < VINMAX IL = 0
-
0.8
-
μA